-
Bedov Anatoliy Ivanovich -
Moscow State University of Civil Engineering (National Research University) (MGSU)
Candidate of Technical Sciences, Professor, Department of Reinforced Concrete and Stone Structures, Moscow State University of Civil Engineering (National Research University) (MGSU), 26, Yaroslavskoe shosse, Moscow, 129337, Russian Federation.
-
Gaysin Askar Miniyarovich -
Ufa State Petroleum Technological University (USPTU)
Candidate of Technical Sciences, Associate Professor, Department of Building Structures, Ufa State Petroleum Technological University (USPTU), Office 225, 195, Mendeleeva St., Ufa, 450062, Russian Federation.
-
Gabitov Azat Ismagilovich -
Ufa State Petroleum Technological University (USPTU)
Doctor of Technical Sciences, Professor, Department of Building Structures, Ufa State Petroleum Technological University (USPTU), Office 225, 195, Mendeleeva St., Ufa, 450062, Russian Federation.
-
Kuznetsov Dmitriy Valeryevich -
Ufa State Petroleum Technological University (USPTU)
Candidate of Technical Sciences, Associate Professor, Department of Building Structures, Ufa State Petroleum Technological University (USPTU), Office 225, 195, Mendeleeva St., Ufa, 450062, Russian Federation.
-
Salov Aleksandr Sergeevich -
Ufa State Petroleum Technological University (USPTU)
Candidate of Technical Sciences, Associate Professor, Department of Highways and Technology of Construction Operations, Ufa State Petroleum Technological University (USPTU), Office 225, 195, Mendeleeva St., Ufa, 450062, Russian Federation.
-
Abdulatipova Elena Midkhatovna -
Ufa State Petroleum Technological University (USPTU)
Doctor of Technical Sciences, Associate Professor, Professor of Department of Technological Machines and Equipment, Ufa State Petroleum Technological University (USPTU), Office 225, 195, Mendeleeva St., Ufa, 450062, Russian Federation.
Energy efficiency in construction is the main direction of energy saving in which the basic measure is to reduce heat losses through walling. In this regard, a particularly promising measure is an application of high-hollow multislot ceramic for external walls due to its predictable properties and reliability in operation. Range of high-hollow ceramic products currently manufactured in the Republic of Bashkortostan is considered in the article. Simulation and calculation of strength characteristics of high-hollow ceramic stones in the SCAD program system were performed, fracture model geometric parameters were obtained. Results of mechanical tests of high-hollow ceramic products are shown. The simulation and calculations performed in the SCAD program system with obtaining of geometric parameters of the fracture model made it possible to compare the convergence of calculation results with actual test results. Based on the results of the performed research it is concluded that the fracture model in the SCAD program system has practically coincided with the fracture pattern obtained in the process of experimental study of strength of high-hollow ceramic stones.
DOI: 10.22227/1997-0935.2017.1.17-25