Protective coating as a factor to ensure the strength and hydraulic performance of recoverable pipelines
Pages 74-82
The authors present an analysis of various types of internal protective pipeline coatings to ensure the strength and hydraulic characteristics of a remodeled pipeline and related coating methods for effective trenchless renovation of engineering systems, water supply systems and sanitation. As protective coating the authors considered a round profile tube of a smaller diameter than of the old pipe, close to the old pipe, sprayed lining on the basis of inorganic and inorganic materials. The article analyzes the methods of trenchless renovation for applying protective coatings: routing in the old pipeline of new pipes made of polymeric materials or polymeric sleeves, centrifugal spraying on the inner surface of pipelines’ inorganic and organic protective coatings. Special attention was paid to bag technology, providing the required strength properties at specific values of the modulus of elasticity and a number of external factors such as the depth of the existing pipe, the existence and magnitude of the horizon groundwater over it. Also attention is paid to the application technology of tape coatings ribbed profile on the inner surface of pipelines. This technology has a unique feature, which is the ability of recoverable pipeline functioning during its renovation by winding an endless belt and the formation of a new pipe. The tape coating winding is carried out by different types of spiral winding machines. The thickness of the protective coating layer forming the tube remains minimal. Inorganic cement-sand and organic coatings were considered as alternative options for repair of pipelines, which allow to localize the defects in the form of a fistula, minor cracks and other damages. However it is noted that a cement-sandy covering is inferior to organic, because it does not provide the strength characteristics of the pipeline system. The main advantage of the organic coating is mudding fistula of a large diameter, making a high wear-resisting pipe, ensuring a smooth surface. Then the protective coating almost merges with the old pipeline. The conclusion is made on the necessity of taking account of the potential for energy saving in case of various protective coatings and implemented trenchless technologies application.
DOI: 10.22227/1997-0935.2015.1.74-82
- Alekseev M.I., Ermolin Yu.A. Ispol’zovanie otsenki nadezhnosti stareyushchikh kanalizatsionnykh setey pri ikh rekonstruktsii [Use of Reliability Estimation of on Aging Sewer Networks During Their Reconstruction]. Vodosnabzhenie i sanitarnaya tekhnika [Water Supply and Sanitary Technique]. 2004, no. 6, pp. 21—23. (In Russian)
- Dobromyslov A.Ya. Problema dolgovechnosti i nadezhnosti truboprovodnykh sistem [The Problem of Durability and Reliability of Pipeline Systems]. Santekhnika [Sanitary Engineering]. 2003, no. 5, pp. 2—4. (In Russian)
- Orlov V.A. Laboratornyy praktikum po rekonstruktsii i vosstanovleniyu inzhenernykh setey [Laboratory Workshop on Reconstruction and Rehabilitation of Engineering Networks]. Moscow, ASV Publ., 2004, 120 p. (In Russian)
- Otstavnov A.A. Sovremennye materialy i tekhnologii dlya realizatsii zadach reformy ZhKKh [Modern Materials and Technologies to Achieve the Objectives of the Housing Reform]. Santekhnika [Sanitary Engineering]. 2004, no. 4, pp. 2—4. (In Russian)
- Khramenkov S.V., Primin O.G., Orlov V.A., Otstavnov A.A. Reglament ispol’zovaniya polietilenovykh trub dlya rekonstruktsii setey vodosnabzheniya i vodootvedeniya [Regulations on the Use of Polyethylene Pipes for Reconstruction of Water Supply and Sanitation Systems]. Moscow, Miklosh Publ., 2007, 129 p. (In Russian)
- Khantaev I.S., Orlov E.V. Truby dlya realizatsii bestransheynykh tekhnologiy protyagivaniya i prodavlivaniya [Pipes for Trenchless Technologies of Pulling and Driving]. Zarubezhnyy i otechestvennyy opyt v stroitel’stve [Foreign and Native Experience in Construction]. 2007, no. 2, pp. 75—86. (In Russian)
- Otstavnov A.A., Orlov E.V., Khantaev I.S. Pervoocherednost’ vosstanovleniya truboprovodov vodosnabzheniya i vodootvedeniya [Priority of Recovering Water Supply and Sanitation Pipelines]. Stroitel’nyy inzhiniring [Construction Engineering]. 2007, no. 10, pp. 44—49. (In Russian)
- Zwierzchowska A. Technologie bezwykopowej budowy sieci gazowych, wodociagowych i kanalizacyjnych. Politechnika swietokrzyska. 2006, 180 p.
- Frassinelli A., Furlani B. Trenchless Pipeline Removal (TPR). NO-DIG 2013. Sydney, Australia, 1—4 September 2013. Available at: http://toc.proceedings.com/22211webtoc.pdf. Date of access: 19.11.2013.
- Rameil M. Handbook Of Pipe Bursting Practice. Vulkan Verlag, 2007, 351 p.
- Brahler C. City of Helena. California Rutherford 12-inch Diameter Water Pipeline Rehabilitation. NO-DIG 2013. Sydney, Australia, 1—4 September 2013. Available at: http://toc.proceedings.com/22211webtoc.pdf. Date of access: 19.11.2013.
- Khar’kin V.A. K voprosu vybora trub iz polietilenov razlichnykh klassov dlya bestransheynoy zameny vetkhikh napornykh i samotechnykh truboprovodov [To the Question of Choosing Pipes Made of PE of Different Classes for Trenchless Replacement of the Old Pressure and Gravity Pipelines]. Santekhnika [Sanitary Engineering]. 2003, no. 5, pp. 34—38. (In Russian)
- Orlov V.A., Shlychkov D.I., Koblova E.V. Sravnenie metodov bestransheynoy renovatsii truboprovodnykh sistem v sfere energosberezheniya [Comparing the Methods of Trenchless Renovation of Pipeline Systems in the Field of Energy Saving]. Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii pamyati akademika RAN S.V. Yakovleva [Materials of the International Science and Practice Conference Dedicated to the Member of RAS S.V. Yakovlev]. Moscow, MGAKKhiS Publ., 2011, pp. 256—263. (In Russian)
- Zwierzchowska A. Optymalizacja doboru metod bezwykopowej budowy. Politechnika swietokrzyska. 2003, 160 p.
- Otstavnov A.A., Khantaev I.S., Orlov E.V. K vyboru trub dlya bestransheynogo ustroystva truboprovodov vodosnabzheniya i vodootvedeniya [Selection of Pipes for Trenchless Arrangement of Water Supply and Sanitation Pipelines]. Plasticheskie massy [Journal of Plastic Masses]. 2007, pp. 40—43. (In Russian)
- Khar’kin V.A. Sistematizatsiya i analiz patologiy vodootvodyashchikh setey, podlezhashchikh vosstanovleniyu [Systematization and Analysis of the Pathologies of Drainage Networks to be Restored]. ROBT [Russian Society on Implementation of Trenchless Technologies]. 2001, no. 2, pp. 13—25. (In Russian)
- Kuliczkowski A., Kuliczkowska E., Zwierzchowska A. Technologie beswykopowe w inzeynierii srodowiska. Wydawnictwo Seidel-Przywecki Sp. 2010, 735 p.
- Ishmuratov R.R., Stepanov V.D., Orlov V.A. Opyt primeneniya bestransheynoy spiral’no-navivochnoy tekhnologii vosstanovleniya truboprovodov na ob”ektakh Moskvy [Experience of the Use of Trenchless Spiral-Winding Technology of Piping Recovery on the Objects of Moscow]. Vodosnabzhenie i sanitarnaya tekhnika [Water Supply and Sanitary Technique]. 2013, no. 6, pp. 27—32. (In Russian)
- Khar’kin V.A. Gidravlicheskie osobennosti kanalizatsionnykh setey s uchastkami iz polimernykh trub, ulozhennykh bestransheyno vzamen vetkhikh truboprovodov iz traditsionnykh trub [Hydraulic Characteristics of Sewer Networks with Areas of Plastic Pipes Laid Trenchless Instead of the Old Pipelines of Traditional Pipes]. Santekhnika [Sanitary Engineering]. 2003, no. 4, pp. 30—35. (In Russian)
- Orlov V.A., Zotkin S.P., Khar’kin V.A. Vybor optimal’nogo metoda bestransheynogo vosstanovleniya beznapornykh truboprovodov [Choosing the Optimal Method of Trenchless Reconstruction of Gravity Pipeline]. ROBT [Russian Society on Implementation of Trenchless Technologies]. 2001, no. 4, pp. 30—34. (In Russian)
- Orlov E.V., Salomeev V.P., Kruglova I.S. Otsenka ostatochnogo resursa napornykh stal’nykh truboprovodov sistem vodosnabzheniya i vodootvedeniya [Residual Life Assessment of Pressure Steel Pipelines for Water Supply and Sanitation Systems]. Problemy razvitiya transportnykh i inzhenernykh kommunikatsiy [Issues of the Development of Transport and Engineering Services]. 2005. no. 3—4, pp. 25—31. (In Russian)
- Orlov V.A., Averkeev I.A. Analiz avtomatizirovannykh programm rascheta vodoprovodnykh setey v tselyakh gidravlicheskogo modelirovaniya pri renovatsii truboprovodov [Analysis of CAD Software Designated for Analysis of Water Supply Systems for the Purpose of Hydraulic Modeling Designated for Renovation of Pipelines]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 3, pp. 237—243. (In Russian)
- Averkeev I.A., Orlov E.V. Proverennaya nadezhnost’: Issledovanie prochnostnykh vozmozhnostey zashchitnogo pokrytiya vodoprovodnykh trub v period ikh renovatsii [Proved Reliability: Investigation of Strength Characteristics of Protective Coating of Pipelines during their Renovation]. Voda Magazine [Water Magazine]. 2013, no. 5 (69), pp. 46—47. (In Russian)
- Nazdrachev I.Yu., Orlov E.V. Tekhniko-ekonomicheskoe sravnenie variantov proektirovaniya remonta truboprovodov sistem vodosnabzheniya [Technical and Economic Comparison of Repair Design Options of Water Piping Systems]. Problemy razvitiya transportnykh i inzhenernykh kommunikatsiy [Issues of the Development of Transport and Engineering Services]. 2007, no. 3—4, pp. 28—39. (In Russian)
- Otstavnov A.A., Ustyugov V.A., Dmitriev A.N. K voprosu minimizatsii zatrat na ustroystvo i ekspluatatsiyu podzemnykh vodoprovodov [On Minimization of the Cost of Installation and Operation of Underground Water Pipes]. Santekhnika [Sanitary Engineering]. 2006, no. 9, pp. 38—43. (In Russian)