ONE-PARAMETRIC DETERMINATIONOF UNIFORM PLASTIC STRAIN FOR STANDARD STEELS
Pages 57-62
One-parametric dependence of the uniform elongation on the total elongation is tested on the basis of preliminary studies. It makes it possible to assess static and cyclic parameters of steel forgings with the thickness values up to 500—800 mm, although no time-consuming and labour-intensive experiments are needed.The total elongation consists of uniform and concentrative components. The uniform elongation corresponds to the maximum loading value attained in the process of static tension testing. The special feature and the advantage of this feature is its independence from the shape of samples exposed to testing procedures. This feature is employed to determine the per-unit performance of plastic strain of steel in terms of brittle failure and fatigue resistance of metals. The uniform elongation correlates with the elasticity used to evaluate the cold brittleness of metal materials. Thus, the assessment of the uniform plastic deformation is needed to make an educated choice of materials and analyze the conditions of processing industrial and structural steels.
DOI: 10.22227/1997-0935.2013.6.57-62
- Gustov Yu.I., Gustov D.Yu., Bol’shakov V.I. Prochnostno-plasticheskaya indeksatsiya metallicheskikh materialov [Strength and Plasticity Indexing of Metal Materials]. Metallurgiya i gornorudnaya promyshlennost’ [Metallurgy and Mining Industry]. 1996, no. 3-4, pp. 31—33.
- Balandin V.A., Potapov V.N., Yakovleva V.S. Otsenivat’ rabotosposobnost’ konstruktsiy po ravnomernomu otnositel’nomu udlineniyu staley [Assessment of Performance of Structures on the Basis of Uniform Relative Elongation of Steels]. Promyshlennoe stroitel’stvo [Industrial Engineering]. 1976, no. 11, pp.37—38.
- Matt K. Zeitschrift f?r Metallkunde. 1962. Bd. 53, H4.
- Borisova S.A. Vliyanie termotsiklicheskoy obrabotki na rabotosposobnost’ desyati konstruktsionnykh staley [Influence of Thermal-cycle Treatment on Performance of Ten Grades of Structural Steel]. Materialovedenie i metallurgiya [Material Science and Metallurgy]. Trudy NGTU [Works of Nizhegorodsky State University of Technology]. Nizhny Novgorod, NGTU Publ., 2004, vol. 42, pp. 220—224.
- Skudnov V.A., Lovkov A.V. Vzaimosvyaz’ predela ustalosti s kriteriyami razrusheniya sinergetiki staley [Interrelation between Fatigue Point and Criteria for Destruction of Steel Synergetics]. Materialovedenie i metallurgiya [Material Science and Metallurgy]. Trudy NGTU [Works of Nizhegorodsky State University of Technology]. Nizhny Novgorod, NGTU Publ., 2004, vol. 42, pp. 119—123.
- Gustov Yu.I., Allattuf H. Sinergeticheskie kriterii staley standartnykh kategoriy prochnosti [Synergetic Criteria of Steels Having Standard Grades of Strength]. Mekhanizatsiya stroitel’stva [Mechanization of Construction Operations]. 2013, no.2, pp. 24—27.
- Korobko V.I. Zolotaya proportsiya i problemy garmonii sistem [Golden Proportion and Problems of Harmony of Systems]. Izdatel’stvo ASV Stran SNG Publ., 373 p.
- Ivanova V.S., Balankin A.S., Bunin I.Zh., Oksogoev A.A. Sinergetika i fraktaly v materialovedenii [Synergy and Fractals in Material Science]. Moscow, Nauka Publ., 1994, 383 p.
- Skudnov V.A. Zakonomernosti predel’noy udel’noy energii deformatsii – osnovnoy sinergeticheskoy (kooperativnoy) kharakteristiki razrusheniya i rabotosposobnosti metallov [Regularities of Limit Per-unit Energy of Deformation as the Principal Synergetic (Cooperative) Destruction and Performance-related Characteristic of Metals]. Trudy NGTU. Materialovedenie i metallurgiya. [Works of Nizhegorodsky State University of Technology. Material Science and Metallurgy]. Nizhny Novgorod, 2004, vol. 94, 101 p.
- Tylkin M.A. Spravochnik termista remontnoy sluzhby [Reference Book for a Heat Treater of the Repair Service]. Moscow, Metallurgiya Publ., 1981, 647 p.