Pages 5-6

- Error

Articles count - 19

Pages - 167

Pages 5-6

Pages 7-21

The recommendations for the development of additional regulatory requirements to reliability of water supply systems in Vietnam are offered. In current construction rules for design, the reliability of water supply systems of water facilities is not standardized. Water systems are classified into three categories, for which the conditions for performing functions in the process of water supply for consumers are formulated. It is not provided to assess the quality of these functions quantitatively. Adoption of design decisions without quantitative assessment of their quality is violating a systematic approach in carrying out construction and design works, which has formed in the global practice. As a result of the research of water supply facilities’ reliability in Vietnam and Russia, the reliability of the existing water supply facilities has been estimated. On the basis of mathematical methods for assessing the reliability of technical objects, the methods for assessing the reliability of water supply facilities and their systems has been justified and systematized. If there is lack of reliability and security requirements to the object of capital construction for design documentation development or such requirements are not established, the development and approval in the prescribed manner of special specifications should precede the documentation development. It is proposed to systematize the statistical data gathering on the reliability of the equipment and facilities of water supply systems by uniform rules. Any designed objects of water supply must have a quantitative estimate of the level of reliability. The outlined methods for assessing the reliability of water supply facilities and systems can be used in the formation of regulatory requirements for reliability in the design of water supply facilities in Vietnam.

DOI: 10.22227/1997-0935.2014.9.7-21

- GOST 27.002—89. Nadezhnost' v tekhnike. Osnovnye ponyatiya. Terminy i opredeleniya [All-Union State Standard GOST 27.002—89. Reliability of Equipment. Basic Concepts. Terms and Definitions]. Nadezhnost' v tekhnike : sbornik GOSTov [Reliability of Equipment : Collection of All-Union State Standards]. Moscow, Publishing and Printing Complex «Izdatel'stvo standartov», 2002, pp. 9—32.
- GOST R 53480—2009. Nadezhnost' v tekhnike. Terminy i opredeleniya [All-Union State Standard GOST R 53480—2009. Reliability of Equipment. Terms and Definitions]. Moscow, Standartinform Publ., 2010, 32 p.
- Barlow R.E., Proschan F. Mathematical Theory of Reliability (Classics in Applied Mathematics). 1987, Society for Industrial and Applied Mathematics, 274 p.
- Bazovskiy I. Nadezhnost'. Teoriya i praktika [Reliability. Theory and Practice]. Moscow, Mir Publ., 1965, 374 p.
- Solov'ev A.D. Osnovy matematicheskoy teorii nadezhnosti [Fundamentals of Mathematical Reliability Theory]. Moscow, Znanie Publ., 1975, 103 p.
- Deryushev L.G., Minaev A.V. Otsenka nadezhnosti sistem vodosnabzheniya [Reliability Estimation for Water Supply Systems]. Vodosnabzhenie i sanitarnaya tekhnika [Water Supply and Sanitary Engineering]. 1988, no. 11, pp. 4—5.
- Deryushev L.G. Pokazateli nadezhnosti truboprovodnykh sistem vodosnabzheniya i vodootvedeniya [Reliability Indicators of Water Supply and Water Disposal Pipeline Systems]. Vodosnabzhenie i sanitarnaya tekhnika [Water Supply and Sanitary Engineering]. 2000, no.12, pp. 6—9.
- Gnedenko B.V., Belyaev Yu.K., Solov'ev A.D. Matematicheskie metody v teorii nadezhnosti [Mathematical Methods in Reliability Theory]. Moscow, Nauka Publ., 1965, 524 p.
- Primin O.G., Klimiashvili L.D. Metodika sbora i obrabotki statisticheskikh dannykh po otkazam otdel'nykh elementov sistemy podachi i raspredeleniya vody [Methods of Gathering and Processing Statistical Data on Separate Components Failure of Water Supply and Distribution System]. Voprosy nadezhnosti sistem vodosnabzheniya : sbornik trudov MISI [Problems of Reliability of Water Supply Systems : Collection of Works of Moscow Construction Engineering Institute]. Moscow, MISI Publ., 1978, no. 170, pp. 82—94.
- Primin O.G., Moiseev V.N. Opredelenie ob"emov vremennogo rezervirovaniya v rayonnykh sistemakh vodosnabzheniya s uchetom potoka otkazov ee elementov [Determination of Time Reservation Volume in Regional Water Supply Systems with Account for its Components Failure Flow]. Sovershenstvovanie sistem vodosnabzheniya g. Moskvy [Improving Water Supply Systems in Moscow]. Moscow, MVNIIproekt Publ., 1984, pp. 23—25.
- Herz R.K. Protsess stareniya i neobkhodimost' vosstanovleniya vodoprovodnykh setey [Ageing Processes and Need for Rehabilitation of Drinking Water Distribution Networks]. AKVA Publ., 1996, no. 9.
- Haviland R. Engineering Reliability and Long Life Design. D. Von Nostrand Co., Inc., New Jersey, 1964.
- Krutsenyuk I.Yu. Matematicheskaya model' prognozirovaniya kolichestvennykh kharakteristik protsessov funktsionirovaniya sistem vodosnabzheniya [Mathematical Prediction Model of Quantitative Characteristics of the Functioning Processes of Water Supply Systems]. Tezisy dokladov 61-y nauchno-tekhnicheskoy konferentsii [Paper Abstracts of the 61st Science and Technical Conference]. Novosibirsk, NGASU Publ., 2004, p. 122.
- Der Kiureghian A., Song J. Multi-scale Reliability Analysis and Updating of Complex Systems by Use of Linear Programming. Reliability Engineering & System Safety. 2008, vol. 93, no. 2, pp. 288—297. DOI: http://dx.doi.org/10.1016/j.ress.2006.10.022.
- Subramanian R., Anantharaman V. Reliability Analysis of a Complex Standby Redundant System. Reliability Engineering & System Safety. 1995, vol. 48, no. 1, pp. 57—70. DOI: http://dx.doi.org/10.1016/0951-8320(94)00073-W.
- Ostfeld A. Reliability Analysis of Water Distribution Systems. Journal of Hydroinformatics. 2004, no. 6, pp. 281—294.

Pages 22-31

The noise state in buildings is a general process of sound energy distribution in the building volume. The sound energy emerging in separate rooms falls on enveloping structures of the rooms and penetrates to the adjacent volumes. In this case the enveloping structures of the noisy rooms become the sources of noise for other rooms. In public buildings flat rooms widely occur, in which the noise from technical rooms often penetrate. The authors observe the principles of evaluating indoor noise in a flat, which penetrates from adjacent premises through the walls. The method of calculating sound pressure levels in rooms is offered. The method takes into account the patterns of direct sound distribution from the flat noise source (wall) and the conditions of the reflected sound field creation in flat space of finite and infinite length. The direct sound energy distribution character is determined by geometric parameters of the wall shedding the noise. The method provides the desired calculation precision of the sound pressure levels.

DOI: 10.22227/1997-0935.2014.9.22-31

- Ledenev V.I. Statisticheskie energeticheskie metody rascheta shumovykh poley pri proektirovanii proizvodstvennykh zdaniy [Statistical Energy Methods for Calculating The Noise Fields in the Design of Industrial Buildings]. Tambov, Tambovskiy Gosudarstvennyy Tekhnicheskiy Universitet Publ., 2001, 156 p.
- Antonov A.I., Zhdanov A.E., Ledenev V.I. Avtomatizatsiya rascheta shumovykh poley v proizvodstvennykh pomeshcheniyakh [Calculation Automation of Noise Fields in Production Rooms]. Vestnik Tambovskogo gosudarstvennogo tekhnicheskogo universiteta [Proceedings of Tambov State Technical University]. 2004, vol. 10, no. 1B, pp. 245—250.
- Giyasov B.I., Matveeva I.V., Makarov A.M. Metod rascheta shuma v ploskikh pomeshcheniyakh s ravnomerno raspredelennymi rasseivatelyami [Noise Evaluation Method in a Flat Room with Evenly Distributed Lenses]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2014, no. 2, pp. 13—21.
- Antonov A.I., Ledenev V.I., Solomatin Ye.O. The Combined Method of Calculation of Noise Conditions in Industrial Buildings of Thermal Power Stations. Scientific Herald of the Voronezh State University of Architecture and Civil Engineering. Construction and Architecture. 2012, no. 1, pp. 7—16.
- Antonov A.I., Solomatin E.O., Tseva A.V. Metod rascheta shuma v dlinnykh pomeshcheniyakh [Method of Noise Analysis inside Long Premises]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 1, pp. 19—25.
- Antonov A.I., Ledenev V.I., Solomatin E.O., Gusev V.P. Metody rascheta urovney pryamogo zvuka, izluchaemogo ploskimi istochnikami shuma v gorodskoy zastroyke [Methods for Calculating the Level of the Direct Sound Emitted by Flat Noise Sources in Urban Environment]. Zhilishchnoe stroitel’stvo [Housing Construction]. 2013, no. 6, pp. 13—15.
- Picaut J., Simon L., D. Polack J. A Mathematical Model of Diffuse Sound Field Based on a Diffusion Equation. Acoustica. 1997, vol. 83, no. 4, pp. 614—621.
- Valeau V., Picaut J., Hodgson M. On the Use of a Diffusion Equation for Room-Acoustic Prediction. Journal of the Acoustical Society of America. 2006, vol. 119, no. 3, pp. 1504—1513. DOI: http://dx.doi.org/10.1121/1.2161433.
- Valeau V., Hodgson M., Picaut J. A Diffusion-based Analogy for the Prediction of Sound Fields in Fitted Rooms. Acta Acustica United with Acustica. 2007, vol. 93, no. 1, pp. 94—105.
- Billon A., Picaut J., Valeau V., Sakout A. Acoustic Predictions in Industrial Spaces Using a Diffusion Model. Advances in Acoustics and Vibration. 2012, Article ID 260394, 9 p. Available at: http://www.hindawi.com/journals/aav/2012/260394/. Date of access: 12.05.2014. DOI: http://dx.doi.org/10.1155/2012/260394.
- Jing Y., Larsen E.W., Xiang N. One-Dimensional Transport Equation Models for Sound Energy Propagation in Long Spaces: Theory. Journal of the Acoustical Society of America. 2010, vol. 127, no. 4, pp. 2312—2322. DOI: http://dx.doi.org/10.1121/1.3298936.
- Jing Y., Xiang N. A Modified Diffusion Equation for Room-Acoustic Predication. Journal of the Acoustical Society of America. 2007, vol. 121, no. 6, pp. 3284—3287. DOI: http://dx.doi.org/10.1121/1.2727331.
- Picaut J., Valeau V., Billon A., Sakout A. Sound Field Modeling in Architectural Acoustics Using a Diffusion Equation. Proceedings of the 20th International Conference on Noise. Honolulu, Hawaii, USA, 2006, pp. 1—8.
- Osipov G.L., Yudin E.Ya., Khyubner G. Snizhenie shuma v zdaniyakh i zhilykh rayonakh [Noise Reduction in Buildings and Residential Areas]. Moscow, Stroyizdat Publ., 1987, 558 p.
- Voronkov A.Yu., Zhdanov A.E. O printsipe vvoda zvukovoy energii v pomeshchenie pri ispol’zovanii integro-interpolyatsionnogo metoda rascheta shumovykh poley [On the Principle of Sound Energy Input into a Room by Using the Integro-Interpolation Method for Calculating Noise Fields]. Trudy TGTU : sbornik nauchnykh statey molodykh uchenykh i studentov [Works of Tambov State Technical University: Collection of Scientific Articles of Young Scientists and Students]. Tambov, 1999, no. 4, pp. 116—118.

Pages 32-38

Bending plate is widely used in the construction of large-span structures. Its advantage is light weight, industrial production, low cost and easy installation. Implementing the algorithm for calculating bending plates in engineering practice is an important issue of the construction science. The generalized equations of finite difference method is a new trend in the calculation of building construction. FDM with generalized equation provides additional options for an engineer along with other methods (FEM). In the article the algorithm for dynamic calculation of thin bending plates basing on FDM was developed. The computer programs for dynamic calculation were created on the basis of the algorithm. The authors come to the conclusion that the more simple equations of FDM can be used in case of solving the impulse load problems in dynamic load calculation of thin bending plate.

DOI: 10.22227/1997-0935.2014.9.32-38

- Belotserkovkiy I.Ya. Kolebaniya pryamougol'nykh plastin peremennoy zhestkosti [Vibrations of Rectangular Plates of Variable Rigidity]. Teoriya plastin i obolochek [Theory of Plates and Shells]. Kiev, AN USSR Publ., 1962, pp. 300—304.
- Timoshenko S.P., Voynovskiy-Kriger S. Plastinki i obolochki [Plates and Shells]. Moscow, Nauka Publ., 1966, 635 p.
- Kiselev V.A. Raschet plastin [Calculation of Plates]. Moscow, Stroyizdat Publ., 1973, 151 p.
- Green A.E. On Reissner’s Theory of Bending of Elastic Plates. Quart. Appl. Math. 1949, vol. 7, no. 2, pp. 223—228.
- Naghdi P.M. On the Theory of Thin Elastic Shells. Quart. Appl. Math. 1957, vol. 14, no. 4, pp. 369—380.
- Reissner E. On the Theory of Bending of Elastic Plates. J. Math. and Phys. 1944, vol. 23, no. 4, pp. 184—191.
- Reissner E. On the Transverse Bending of Plates, Including the Effect of Transverse Shear Deformation. Int. J. Solids and Struct. 1975, vol. 11, no. 5, pp. 569—573. DOI: http://dx.doi.org/10.1016/0020-7683(75)90030-X.
- Salerno V.L., Goldberg M.A. Effect of Shear Deformation on the Bending of Rectangular Plates. J. Appl. Mech. 1960, vol. 27, no. 1, pp. 54—59. DOI: http://dx.doi.org/10.1115/1.3643934.
- Buzun I.M. Metod konechnykh raznostey i metod konechnykh elementov. Sravnenie resheniy dlya plastin [Finite Difference Method and Finite Element Method. Comparison of Solutions for Plate]. Trudy Tyumenskogo industrial'nogo instituta [Works of Tyumen Industrial Institute]. 1974, no. 40, pp. 79—87.
- Vaynberg D.V. Chislennye metody v teorii obolochek i plastin [Numerical Methods in the Theory of Shells and Plates]. Trudy VI Vsesoyuznoy konferentsii po teorii obolochek i plastin [Proceedings of the VI All-Union Conference on the Theory of Shells and Plates]. Moscow, Nauka Publ., 1966, pp. 890—895.
- Ivanov S.A. Analiz izgibaemykh plastinok metodom konechnogo elementa [Analysis of Bending Plates Using Finite Element Method]. Trudy MARKHI [Works of Moscow Institute of Architecture]. 1972, no. 4, pp. 25—31.
- Gabbasov R.F. Raschet plit s ispol'zovaniem raznostnykh uravneniy metoda posledovatel'nykh approksimatsiy [Analysis of Plates Using the Differential Equations Method of Successive Approximation]. Stroitel'naya mekhanika i raschet sooruzheniy [Structural Mechanics and Calculation of Structures]. 1980, no. 3, pp. 27—30.
- Gabbasov R.F., Gabbasov A.R., Filatov V.V. Chislennoe postroenie razryvnykh resheniy zadach stroitel'noy mekhaniki [Numerical Construction of Discontinuous Solutions of Structural Mechanics Problems]. Moscow, ASV Publ., 2008, 277 p.
- Gabbasov R.F., Nizomov D.N. Chislennoe reshenie nekotorykh dinamicheskikh zadach stroitel'noy mekhaniki [Numerical Calculation of Some Dynamical Problems of Structural Mechanics]. Stroitel'naya mekhanika i raschet sooruzheniy [Structural Mechanics and Calculation of Structures]. 1985, no. 6, pp. 51—54.
- Azarkhin A.M., Abovskiy N.P. Ob iteratsionnykh metodakh v nekotorykh zadachakh stroitel'noy mekhaniki [Iterative Methods in Some Problems of Construction Mechanics]. Issledovaniya po teorii sooruzheniy [Studies in the Theory of Structures]. Vol. 23, Moscow, Stroyizdat Publ., 1977, pp. 152—157.
- Abovskiy N.P., Endzhievskiy L.V. Raschet rebristykh plit metodom setok [Calculation of Ribbed Slabs by Grid Method]. Prostranstvennye konstruktsii v Krasnoyarskom krae [Space Structures in Krasnodar Region]. Krasnoyarsk, 1996, no. 2, pp. 168—187.
- Dlugach M.I. Nekotorye voprosy primeneniya metoda setok k raschetu plastin i obolochek [Some Questions of Net Method Application in the Calculation of Plates and Shells]. ETsVM v stroitel'noy mekhanike [Digital computer in the construction mechanics]. Moscow, Gosstroyizdat Publ., 1966, pp. 555—560.
- Rabinovich I.M., Sinitsyn A.P., Terenin B.M. Raschet sooruzheniy na deystvie kratkovremennykh i mgnovennykh sil [Calculation of Structures for Short-term and Instant Strength Impact]. Part 1, Moscow, VIA Publ., 1956, 464 p.
- Rabinovich I.M. Osnovy dinamicheskogo rascheta sooruzheniy na deystvie mgnovennykh i kratkovremennykh sil [Fundamentals of Dynamic Analysis of Structures on an Instantaneous and Short-term Forces]. Moscow. Gosstroyizdat Publ., 1945, 85 p.
- Prager W., Synge J.L. Approximations in Elasticity Based on the Concept of Function Space. Quart. Appl. Math. 1947, vol. 5, no. 3, pp. 241—269.

Pages 39-47

Criteria of plasticity and durability derivative of standard indicators of plasticity (δ, ψ) and durability (σ

_{0,2}, σ

_{B}) are offered. Criteria К

_{δψ} and К

_{s} follow from the equation of relative indicators of durability and plasticity. The purpose of the researches is the establishment of interrelation of derivative criteria with the Page indicator. The values of derivative criteria were defined for steels 50X and 50XH after processing by cold, and also for steels 50G2 and 38HGN after sorbitizing. It was established that the sum of the offered derivative criteria of plasticity and durability С

_{к} considered for the steels is almost equal to unit and corresponds to a square root of relative durability and plasticity criterion C

^{0,5}. Both criteria testify to two-unity opposite processes of deformation and resistance to deformation. By means of the equations for S

_{к} and С it is possible to calculate an indicator of uniform plastic deformation of σ

_{р} and through it to estimate synergetic criteria - true tension and specific energy of deformation and destruction of metal materials. On the basis of the received results the expressions for assessing the uniform and concentrated components of plastic deformation are established. The preference of the dependence of uniform relative lengthening from a cubic root of criterion К

_{δψ}, and also to work of the criteria of relative lengthening and relative durability is given. The advantage of the formulas consists in simplicity and efficiency of calculation, in ensuring necessary accuracy of calculation of the size δ

_{р} for the subsequent calculation of structural and power (synergetic) criteria of reliability of metals.

DOI: 10.22227/1997-0935.2014.9.39-47

- Gustov Yu.I., Allattuf Kh. Issledovanie vzaimosvyazi koeffitsientov plastichnosti i predela tekuchesti staley standartnykh kategoriy prochnosti [Study of Interdependence between Ductility Factors and Yield Limits for Steels of Standard Strength Grades]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 7, pp. 22—26.
- Gustov Yu.I., Gustov D.Yu. K razvitiyu nauchnykh osnov stroitel’nogo metallovedeniya [To Development of Scientific Fundamentals of Construction Metallurgical Science]. Doklady X rossiysko-pol’skogo seminara «Teoreticheskie osnovy stroitel’stva». Varshava [Reports of the 10th Russian-Polish Seminar "Theoretical Foundations of Construction"]. Warsaw, Moscow, ASV Publ., 2001, pp. 307—314.
- Ivanova V.S., Balankin A.S., Bunin I.Zh., Oksogoev A.A. Sinergetika i fraktaly v materialovedenii [Synergetrics and Fractals in Materials Science]. Moscow, Nauka Publ., 1994, 383 p.
- Skudnov V.A. Novye kompleksy razrusheniya sinergetiki dlya otsenki sostoyaniya splavov [New Synergetrics Collapse Complexes for an Assessment of Alloys Condition]. Metalovedenie i metallurgiya. Trudy NGTU imeni R.E. Alekseeva [Metal Science and Metallurgy. Works of Nizhny Novgorod State Technical University n.a. R.E. Alekseev]. N. Novgorod, 2003, vol. 38, pp. 155—159.
- Gustov Yu.I., Gustov D.Yu., Voronina I.V. Sinergeticheskie kriterii metallicheskikh materialov [Synergetic Criteria of Metal Materials]. Sbornik dokladov XV Rossiysko-slovatsko-pol’skogo seminara «Teoreticheskie osnovy stroitel›stva». Varshava [Reports of the 15th Russian-Polish Seminar "Theoretical Foundations of Construction"]. Warsaw, Moscow, MGSU Publ., 2006, pp. 179—184.
- Il’in L.N. Osnovy ucheniya o plasticheskoy deformatsii [Doctrine Bases on Plastic Deformation]. Moscow, Mashinostroenie Publ.,1980, 150 p.
- Fridman Ya.B. Mekhanicheskie svoystva metallov. Ch. 2 Mekhanicheskie ispytaniya. Konstruktsionnaya prochnost’ [Mechanical Properties of Metals. Part 2. Mechanical Tests. Constructional Strength]. Moscow, Mashinostroenie Publ., 1974, 368 p.
- Goritskiy V.M., Terent’ev V.F. Struktura i ustalostnoe razrushenie metallov [Structure and Fatigue Failure of Metals]. Moscow, Metallurgiya Publ., 1980, 208 p.
- Arzamasov B.N., Solov’eva T.V., Gerasimov S.A., Mukhin G.G., Khovava O.M. Spravochnik po konstruktsionnym materialam [Reference Book on Construction Materials]. Moscow, Izd-vo MGTU im. N.E. Baumana Publ., 2005, 640 p.
- Larsen B. Formality of Sheet Metal. Sheck Metal Ind. 1977, vol. 54, no. 10, pp. 971—977.
- Abramov V.V., Djagouri L.V., Rakunov Yu.P. Kinetics and Mechanism of Contact Interaction with the Deformation and Thermal Deformation Effects on Crystalline Inorganic Materials. Materials of the 1st International Scientific Conference "Global Science and Innovation" (Chicago, USA, December 17—18th, 2013). Chicago, USA, 2013, vol. 2, pp. 360—371.
- Abramov V.V., Djagouri L.V., Rakunov Yu.P. Growth Kinetics of Strength (Setting) between Dissimilar Crystalline Materials with Dramatically Different Resistances to Plastic Deformation and Natures of Chemical Bonds. Materials of the 1st International Scientific Ñonference «Global Science and Innovation» (Chicago, USA, December 17—18th, 2013). Chicago, USA, 2013, vol. 2, pp. 372—380.
- Callister W.D., Rethwisch D.G. Fundamentals of Materials Science and Engineering. An Integrated Approach. John Wiley Sons, Ins., 2008, 896 p.
- Sansalone M., Jaeger B. Applications of the Impact-Echo Method for Detecting Flaws in Highway Bridges. Structural Materials Technology. An NTD Conference, San Diego, California, 1996, pp. 204—210.
- Tylkin M.A. Prochnost’ i iznosostoykost’ detaley metallurgicheskogo oborudovaniya [Strength and Wear Resistance of Details of the Metallurgical Equipment]. Moscow, Metallurgiya Publ., 1965, 347 p.

Pages 48-53

The article discusses the features of the stress state of the plate of capitalless girderless overlapping as a result of force of prestressed reinforcement, where the reinforcement used is high-strength reinforcement in flexible shell of "Monostrend" type. The peculiarity of specific design solution is a diagonal arrangement of prestressed reinforcement with heads fixed at the outer edges of the columns. The purpose of this arrangement of the prestressed reinforcement is deflection reduction of the central area of a plate and reduction of the width of cracks on the lower surface in the bay and on the upper surface of the support areas. The article shows the distribution of normal stresses of existing loads in the plane plate. The stress distribution over the thickness of the plate was assumed uniform. In order to establish design size of a section in diagonal direction it is possible to set the variables x and y and then calculate the coordinates of stress distribution curves in the concrete as a result of compression by prestress force. The authors offer diameter values of equal stresses in case of 4 and 8 K7O ropes. The method of calculating prestressing losses of concrete creep are offered.

DOI: 10.22227/1997-0935.2014.9.48-53

- Rukovodstvo po proektirovaniyu zhelezobetonnykh konstruktsiy s bezbalochnymi perekrytiyami [Design Guidelines for Reinforced Concrete Structures with Beamless Floor]. Moscow, Stroyizdat Publ., 1979, 63 p.
- Pogrebnoy I.O., Kuznetsov V.D. Bezrigel'nyy predvaritel'no napryazhennyy karkas s ploskim perekrytiem [Beamless Prestressed Frame with Flat Roof]. Inzhenerno-stroitel'nyy zhurnal [Engineering and Construction Journal]. 2010, no. 3, pp. 52—55.
- Karpenko N.I. Obshchie modeli mekhaniki zhelezobetona [General Models of Reinforced Concrete Mechanics]. Moscow, Stroyizdat Publ., 1996, 416 p.
- Beglov A.D., Sanzharovskiy R.S. Teoriya rascheta zhelezobetonnykh konstruktsiy na prochnost' i ustoychivost' : Sovremennye normy i Evrostandarty [Theory of Strength and Stability Calculation of Reinforced Concrete Structures]. Moscow, Saint Petersburg, ASV Publ., 2006, 221 p.
- Vol'mir A.S. Gibkie plastinki i obolochki [Flexible Plates and Shells]. Moscow, Gosudarstvennoe izdatel’stvo tekhniko-teoreticheskoy literatury Publ., 1956, 419 p.
- Muttoni A. Conception et dimensionnement de la precontrainte. Ecole Polytechnique federale de Lausanne, Ann?e acad?mique 2011—2012, 35 p. Available at: http://i-concrete.epfl.ch/cours/epfl/pb/2012/Pr%C3%A9sentations/ponts-1-P-2012-05-08.pdf/. Date of access: 22.01.2014.
- Sitnikov S.L., Miryushenko E.F.; patent holder S.L. Sitnikov. Pat. 2427686 RF, MPK E04C 5/10. Sposob izgotovleniya predvaritel'no napryazhennykh zhelezobetonnykh konstruktsiy i monostrend. ¹ 2009132979/03 ; zayavl. 02.09.2009 ; opubl. 27.08.2011. Byul. ¹ 24 [Russian Patent 2427686 RF, MPK E04C 5/10. Method of Manufacturing Prestressed Reinforced Concrete Structures and Monostrends. No. 2009132979/03 ; notice 02.09.2009 ; publ. 27.08.2011. Bulletin no. 24.]. 8 p.
- Spasojevic A., Burdet O., Muttoni A. Applications structurales du beton fiber ultra-hautes performances aux ponts. EPFL, Laboratoire de Construction en beton, 2008, 60 p. Available at: http://ibeton.epfl.ch/Publications/2008/Spasojevic08b.pdf/. Date of access: 22.01.2014.
- Tikhonov I.N. Armirovanie elementov monolitnykh zhelezobetonnykh zdaniy : Posobie po proektirovaniyu [Reinforcement of the Elements of Monolithic Reinforced Concrete Buildings]. Moscow, NITs Stroitel'stvo Publ., 2007, 168 p.
- Wieczorek M. Influence of Amount and Arrangement of Reinforcement on the Mechanism of Destruction of the Corner Part of a Slab-Column Structure. Prosedia Engineering. 2013, vol. 57, pp. 1260—1268. Available at: http://www.sciencedirect.com/science/article/pii/S1877705813008928. Date of access: 22.02.2014. DOI: http://dx.doi.org/10.1016/j.proeng.2013.04.159.
- Vatin N.I., Ivanov A.D. Sopryazhenie kolonny i bezrebristoy beskapitel'noy plity perekrytiya monolitnogo zhelezobetonnogo karkasnogo zdaniya [Connection of a Column and Non-ribbed Capitalless Slab of Monolithic Reinforced Concrete Frame Building]. Saint Petersburg, SPbODZPP Publ., 2006, 82 p. Available at: http://www.engstroy.spb.ru/library/ivanov_kolonna_i_perekrytie.pdf. Date of access: 22.01.2014.
- Samokhvalova E.O., Ivanov A.D. Styk kolonny s bezbalochnym beskapitel'nym perekrytiem v monolitnom zdanii [The Joint of a Column and Beamless Capitalless Floor in Monolithic Building]. Inzhenerno-stroitel'nyy zhurnal [Engineering and Construction Journal]. 2009, no. 3. Available at: http://engstroy.spb.ru/index_2009_03/samohvalova_styk.pdf. Date of access: 22.01.2014.
- Bezukhov N.I. Osnovy teorii uprugosti, plastichnosti i polzuchesti [Fundamentals of Elasticity and Creep Theory]. 2nd edition, Moscow, Vysshaya shkola Publ., 1968, 512 p.
- Altenbach H., Huang C., Naumenko K. Creep-damage Predictions in Thinwalled Structures by Use of Isotropic and Anisotropic Damage Models. The Journal of Strain Analisys for Engineering Design. 2002, vol. 37, no. 3, pp. 265—275. http://dx.doi.org/10.1243/0309324021515023.
- Altenbach H., Morachkovsky O., Naumenko K., Sychov A. Geometrically Nonlinear Bending of Thin-walled Shells and Plates under Creep-damage Conditions. Archive of Applied Mechanics. 1997, vol. 67, no. 5, pp. 339—352. DOI: http://dx.doi.org/10.1007/s004190050122.

Pages 54-66

The method of localization of changes in the deflected mode is based on the analysis of time series of oscillations (displacement, velocity, acceleration) of building constructions and structures. The method is based on the hypothesis that any changes in the deflected mode of structures result in changes in the oscillation energy. In this case, once the information on the structure oscillation parameters in different points of the building is available, the changes in the oscillation energy will signify the changes in the deflected mode in the relevant points.

DOI: 10.22227/1997-0935.2014.9.54-66

- Senderov B.V. Avarii zhilykh zdaniy [Emergencies of Residence Buildings]. Moscow, Stroyizdat Publ., 1992, 216 p.
- Barkov Yu.V., Zakharov V.F., Opyleva S.N. Nekotorye sluchai povrezhdeniy i vosstanovleniya zdaniy [Some Cases of Damages and Reconstruction of Buildings]. Zhilishchnoe stroitel'stvo [Housing Construction]. 2000, no. 8, pp. 18—20.
- Senderov B.V., Barkov Yu.V. Povrezhdeniya zdaniy i mery po ikh predotvrashcheniyu [Damages of Buildings and Preventive Measures]. Moscow, Znanie Publ., 1986, 62 p.
- Eremin K.I., Makhutov N.A., Pavlova G.A., Shishkina N.A. Reestr avariy zdaniy i sooruzheniy 2001—2010 [Register of Emergencies of Buildings and Constructions in 2001—2010]. Moscow, RAASN Publ., 2011, 320 p.
- Shakhraman'yan A.M. Metodicheskie osnovy sozdaniya system monitoringa nesushchikh construktsiy unikal'nykh ob''ektov [Methodological Principles of the Development of Monitoring Systems of Load-bearing Structures in Unique Buildings]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 1, vol. 1, pp. 256—261.
- Grigor'ev Yu.P., Gur'ev V.V., Dmitriev A.N., Dorofeev V.M., Stepanov A.Yu. Patent 2292433 RF, MPK E04G23/00, G01M7/00. Sposob opredeleniya izmeneniy napryazhennodeformirovannogo sostoyaniya konstruktsiy zdaniya ili sooruzheniya slozhnoy prostranstvennoy formy; patentoobladatel' Moskovskiy nauchno-issledovatel'skiy i proektnyy institut tipologii, eksperimental'nogo proektirovaniya. 2005128100/03; zayavl. 09.09.2005; opubl. 27.01.2007. Byul. ¹ 3 [Russian Patent 2292433 RF, MPK E04G23/00, G01M7/00. The Method of Determining the Stress and Strain State Changes in the Structures of a Building or a Construction of a Complex Spatial Form; Patent Holder — Moscow Scientific Research and Design Institute of Typology, Experimental Design. 2005128100/03; applied 09.09.2005; publ. 27.01.2007. Bulletin no. 3]. 6 p.
- Grigor'ev Yu.P., Gur'ev V.V., Dmitriev A.N., Dorofeev V.M. Patent 2254426 RF, MPK E04G23/00, G01M7/00. Sposob opredeleniya izmeneniy napryazhenno-deformirovannogo sostoyaniya konstruktsiy zdaniya ili sooruzheniya; patentoobladatel' Moskovskiy nauchno-issledovatel'skiy i proektnyy institut tipologii, eksperimental'nogo proektirovaniya. ¹ 2004128916/03; zayavl. 04.10.2004; opubl. 20.06.2005. Byul. ¹ 17 [Russian Patent 2254426 RF, MPK E04G23/00, G01M7/00. The Method of Determining the Stress and Strain State Changes in the Structures of a Building or a Construction; Patent Holder — Moscow Scientific Research and Design Institute of Typology, Experimental Design. No. 2004128916/03; applied 04.10.2004; publ. 20.06.2005. Bulletin no. 17]. 6 p.
- Shablinskiy G.E. Naturnye dinamicheskie issledovaniya stroitelnykh konstruktsiy [Field Dynamic Surveys of Building Structures]. Monograph. Moscow, 2009, 214 p.
- Shakhraman'yan A.M. Analiz vozmozhnostey monitoring sostoyaniya vysotnykh zdaniy na osnove kontrolya sobstvennykh chastot kolebaniy [Analysis of Monitoring Possibility of High-rise Buildings’ State on the Basis of Natural Frequencies Control]. Russkiy inzhener [Russian Engineer]. 2013, no. 1 (36), pp. 34—36.
- Shakhraman'yan A.M. Systemy monitoringa i prognoza tekhnicheskogo sostoyaniya zdaniy i sooruzheniy. Teoriya i praktika [Monitoring and Forecast Systems of Technical State of Buildings and Constructions. Theory and Practice]. Russkiy inzhener [Russian Engineer]. 2011, no. 1 (28), pp. 54—64.

Pages 67-75

The research of raw base for construction materials allows theoretically justifying and experimentally confirming the ability to control the processes of structure formation in order to obtain materials with the desired properties. Clay matter has a complicated chemical and mineral composition. In recent decades the structures and properties of clay minerals have been investigated in detail with the help of modern research methods. Out of the whole quantity of clay deposits the production sector uses only the small part, which satisfies the standard technical documents in force. In case of using non-traditional clay rocks in the production of wall materials it is possible to cross over from traditional raw materials to another - composite binder, obtained on the basis of natural nanodispersed raw material, which helps to speed up neoformation synthesis, change their morphology, optimize microstructure of cementing compounds and consequently improve physical and mathematical properties of the products. Using non-traditional for construction industry clay rocks in the production of silicate materials increases the strength of raw-brick 4...11 times, which facilitates the production of high cavitated product and significantly expands the range of products.

DOI: 10.22227/1997-0935.2014.9.67-75

- Lesovik V.S. Povyshenie effektivnosti proizvodstva stroitel'nykh materialov s uchetom genezisa gornykh porod [Efficiency Increase of the Production of Building Materials with Regard to the Genesis of Rocks]. Moscow, ASV Publ., 2006, 526 p.
- Lesovik V.S. Geonika. Predmet i zadachi : monografiya [Geonics. Subject and Objectives. Monograph]. Belgorod, BGTU Publ., 2012, 219 p.
- Volodchenko A.N. Vliyanie peschano-glinistykh porod na optimizatsiyu mikrostruktury avtoklavnykh silikatnykh materialov [Influence of Sandy and Clay Rocks on Microstructure Optimization of Autoclave Silicate Materials]. Sbornik nauchnykh trudov SWorld. Sovremennye problemy i puti ikh resheniya v nauke, transporte, proizvodstve, obrazovanii 2012 : materialy mezhdunarodnoy nauchno-prakticheskoy konferentsii [Collection of Scientific Works SWorld. Contemporary Problems and Ways of their Solution in Science, Transport, Production, Education 2012 : Materials of the International Science and Practice Conference]. Odessa, KUPRIENKO Publ., 2012, no. 4, vol. 47, pp. 32—35.
- Volodchenko A.N., Zhukov R.V., Lesovik V.S., Doroganov E.A. Optimizatsiya svoystv silikatnykh materialov na osnove izvestkovo-peschano-glinistogo vyazhushchego [Optimization of the Properties of Silicate Materials Based on Lime-sand-clay Binder]. Stroi-tel'nye materialy [Construction Materials]. 2007, no. 4, pp. 66—69.
- Volodchenko A.N., Lukutsova N.P., Prasolova E.O., Lesovik V.S., Kuprina A.A. Sand-Clay Raw Materials for Silicate Materials Production. Advances in Environmental Biology. June 2014, vol. 8, no. 10, pp. 949—955.
- Volodchenko A.N., Lesovik V.S. Reologicheskie svoystva gazobetonnoy smesi na osnove netraditsionnogo syr'ya [Rheological Properties of Aerated Concrete Mixtures Based on Non-traditional Raw Materials]. Vestnik BGTU im. V.G. Shukhova [Proceedings of Belgorod State Technological University Named after V. G. Shukhov]. 2012, no. 3, pp. 45—48.
- Volodchenko A.N. Avtoklavnye silikatnye materialy na osnove otkhodov gornodobyvayushchey promyshlennosti [Autoclave Silicate Materials Based on Mining Waste]. Sbornik nauchnykh trudov SWorld [Collection of Scientific Works of SWorld]. Sbornik nauchnykh trudov SWorld. Sovremennye problemy i puti ikh resheniya v nauke, transporte, proizvodstve, obrazovanii 2012 : materialy mezhdunarodnoy nauchno-prakticheskoy konferentsii [Collection of Scientific Works SWorld. Contemporary Problems and Ways of their Solution in Science, Transport, Production, Education 2012 : Materials of the International Science and Practice Conference]. Odessa, KUPRIENKO Publ., 2012, no. 4, vol. 47, pp. 29—32.
- Volodchenko A.N., Lesovik V.S., Alfimov S.I., Zhukov R.V. Use of Mining Industry Wastes for Silicate Materials Production. The 3rd International Conference on Chemical Investigation & Utilization of Natural Resources, June 25—28. Ulaanbaatar, Mongolia, 2008, pp. 241—245.
- Volodchenko A.N. Netraditsionnoe syr'e dlya avtoklavnykh silikatnykh materialov [Nontraditional Raw Materials for Autoclave Silicate Materials]. Tekhnicheskie nauki — ot teorii k praktike [Engineering Sciences — from Theory to Practice]. 2013, no. 20, pp. 82—88.
- Lesovik V.S., Volodchenko A.A. Vliyanie sostava syr'ya na svoystva bezavto-klavnykh silikatnykh materialov [Effect of Raw Material Composition on the Properties of Non-autoclave Silicate Materials]. Vestnik BGTU im. V.G. Shukhova [Proceedings of Belgorod State Technological University Named after V. G. Shukhov]. 2013, no. 1, pp. 10—15.
- Alfimova N.I., Shapovalov N.N. Materialy avtoklavnogo tverdeniya s ispol'zovaniem tekhnogennogo alyumosilikatnogo syr'ya [Materials of Autoclave Curing with Technogenic Aluminosilicate Raw Materials]. Fundamental'nye issledovaniya [Fundamental Research]. 2013, no. 6, Part 3, pp. 525—529.
- Alfimova N.I., Shapovalov N.N., Abrosimova O.S. Ekspluatatsionnye kharakteristiki silikatnogo kirpicha, izgotovlennogo s ispol'zovaniem tekhnogennogo alyumosilikatnogo syr'ya [Performance Specifications of silicate brick, manufactured using technogenic aluminosilicate raw materials]. Vestnik BGTU im. V.G. Shukhova [Proceedings of Belgorod State Technological University Named after V. G. Shukhov]. 2013, no. 3, pp. 11—14.
- Fomina E.V., Strokova V.V., Kozhukhova M.I. Effect of Previously Slacked Lime on Properties of Autoclave Composite Binders. World Applied Sciences Journal. 2013, vol. 24, no. 11, pp. 1519—1524. DOI: http://dx.doi.org/10.5829/idosi.wasj.2013.24.11.7018.
- Lesovik V.S., Aksenova L.L., Savich M.L., Ginsburg A.V. Functional Characteristics and Energy Intensity of Concretes. World Applied Sciences Journal. 2013, vol. 25, no. 1, pp. 92—96. DOI: http://dx.doi.org/10.5829/idosi.wasj.2013.25.01.7028.
- Lesovik V.S., Ageeva M.S., Shakarna M.I.H. Efficient Binding Using Composite Tuffs of the Middle East. World Applied Sciences Journal. 2013, vol. 24, no. 10, pp. 1286—1290. DOI: http://dx.doi.org/10.5829/idosi.wasj.2013.24.10.7002.

Pages 76-81

A water supply system of a special purpose is a necessary element in hot and cold shops of the industrial enterprises, office buildings and the medical centers, and also other rooms. The water supply systems of a special purpose, which give subsalty, sparkling water and water sated with oxygen, allow people to prevent, for example, strong dehydration of an organism, which is possible at big losses of water, especially in case of the people working in hot shops. Various elements of special drinking water supply system are given in the article, their main functions are described. Different types of the water folding devices pumping water to consumers, one of which is drinking fountain, are considered. Possible systems of water filtration, which can be established for quality improvement, are transferred. Among them the great role is played by membrane technologies and the return osmosis, which is widely applied now. Today there is a possibility of construction, both the centralized water supply system of a special purpose, and local. Besides, the least is a more preferable option taking into account capital expenditure for construction and operation, and also it can lead to solid resource-saving as a result of the electric energy saving going for water heating in heaters. Automatic machines of drinking water for a local water supply system of a special purpose have indisputable advantages. They are capable to carry out several functions at the same time, and also to distribute water to consumers. It allows placing all the necessary equipment, which will be well in harmony with the environment in their small and compact case, and will fit into any difficult interior of the room. Also they are very easily connected to the systems of an internal water supply system by means of a propylene tube that allows to change their sposition in space and to transfer to any place of the room with fast installation of equipment. Also the ecological effect was proved upon transition from coolers on machine guns of drinking water that allowed refusing the order of plastic bottles, which after use start accumulating on dumps, polluting the environment.

DOI: 10.22227/1997-0935.2014.9.76-81

- Orlov E.V. Sistema vnutrennego vodoprovoda. Novyy tip vodorazbornykh priborov v zdaniyakh. Avtomaty pit'evoy vody [System of an Internal Water Supply System. New Type of Water Folding Devices in Buildings. Drinking Water Machine]. Tekhnika i tekhnologii mira [Equipment and Technologies of the World]. 2013, no. 1, pp. 37—41.
- Jegatheesan V., Kim S.H., Joo C.K. Evaluating the Drinking Water Quality through an Efficient Chlorine Decay Model. Water Science and Technology. Water Supply. 2006, vol. 6, no. 4, pp. 1—7. DOI: http://dx.doi.org/10.2166/ws.2006.774.
- Isaev V.N., Chukhin V.A., Gerasimenko A.V. Resursosberezhenie v sisteme khozyaystvenno-pit'evogo vodoprovoda [Resource-saving in system of an economic and drinking water supply system]. Santekhnika [Bathroom Fitments]. 2011, no. 3, pp. 14—17.
- Orlov V.A. Puti obespecheniya sanitarnoy nadezhnosti vodoprovodnykh setey [Ways of Ensuring Sanitary Reliability of Water Supply Systems]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2009, no. 1, pp. 181—187.
- Orlov E.V. Vodo- i resursosberezhenie. Zhilye zdaniya kottedzhnykh i dachnykh poselkov [Water- and Resource-saving. Residential Buildings in Cottage and Housing Estates]. Tekhnologii mira [Technologies of the World]. 2012, no. 10, pp. 35—41.
- Peter-Varbanets M., Zurbr?gg C., Swartz C., Pronk W. Decentralized Systems for Potable Water and the Potential of Membrane Technology. Water Research, 2009, vol. 43, no. 2, pp. 245—265. DOI: http://dx.doi.org/10.1016/j.watres.2008.10.030.
- Brodach M.M. Zelenoe vodosnabzhenie i vodootvedenie [Green water supply and water disposal]. Santekhnika [Bathroom Fitments]. 2009, no. 4, pp. 6—9.
- Polak J., Bartoszek M., Sulkowski W.W. Comparison of Humificftion Processes during Sewage Purification in Treatment Plant with Different Technological Processes. Water Research. Sep. 2009, vol. 43, no. 17, pp. 4167—4176.
- Isaev V.N., Presnov V.A. Problemy vodosnabzheniya i vodootvedeniya sovremennoy maloetazhnoy zastroyki v Rossii i idei po uluchsheniyu situatsii v etoy sfere [Problems of Water Supply and Water Disposal of Modern Low Building in Russia and Ideas on Improvement of a Situation in this Sphere]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2009, no. 2, pp. 154—161.
- Tchobanoglous G., Leverenz H.L., Nellor M.H., Crook J. Direct Potable Reuse: The Path Forward. WateReuse Research Foundation and Water Reuse California, Washington, DC, 2011, 114 p. Available at: http://www.deq.idaho.gov/media/829260-direct-potable-reuseconference-2012.pdf. Date of access: 25.07.2014.
- Pervov A.G., Andrianov A.P., Spitsov D.V. Vodo- i energosberezhenie v gorodskom khozyaystve. Primenenie sovremennykh membrannykh tekhnologiy [Water- and Energy Saving in Municipal Economy. Application of Modern Membrane Technologies]. Santekhnika [Bathroom Fitments]. 2013, no. 6, pp. 30—36.
- Takacs I., Vanrolleghem P.A., Wett B., Murthy S. Elemental Balance Based Methodology to Establish Reaction Stoichiometry in Environmental Modelling. Water Science & Technology. 2007, vol. 56, no. 9, pp. 37—41. DOI: http://dx.doi.org/10.2166/wst.2007.606.
- Andrianov A.P. Doochistka moskovskoy vodoprovodnoy vody: primenenie membrannykh tekhnologiy [Tertiary Treatment of the Moscow Tap Water: Application of Membrane Technologies]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2010, no. 4, vol. 2, pp. 16—20.
- Brodach M.M. Ot vodosberezheniya k zdaniyu s nulevym vodopotrebleniem [From Water Savings to a Building with Zero Water Consumption]. Santekhnika [Bathroom Fitments]. 2010, no. 6, pp. 4—7.
- Mikhaylin A.V., Chukhin V.A. Besstochnaya tekhnologiya obessolivaniya vody [Drainless Technology of Water Desalting]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering. 2009, no. 2, pp. 151—153.

Pages 82-92

The deformation of municipal solid waste is a complex process caused by the nature of MSW, the properties of which differ from the properties of common soils. The mass of municipal solid waste shows the mixed behaviour partially similar to granular soils, and partially - to cohesive. So, one of mechanical characteristics of MSW is the cohesion typical to cohesive soils, but at the same time the filtration coefficient of MSW has an order of 1 m/day that is characteristic for granular soils. It has been established that MSW massif can be simulated like the soil reinforced by randomly oriented fibers. Today a significant amount of the verified and well proved software products are available for numerical modelling of soils. The majority of them use finite element method (FEM). The soft soil creep model (SSC-model) seems to be the most suitable for modelling of municipal solid waste, as it allows estimating the development of settlements in time with separation of primary and secondary consolidation. Unlike the soft soil, one of the factors of secondary consolidation of MSW is biological degradation, the influence of which is possible to consider at the definition of the modified parameters essential for soft soil model. Application of soft soil creep model allows carrying out the calculation of stress-strain state of waste from the beginning of landfill filling up to any moment of time both during the period of operation and in postclosure period. The comparative calculation presented in the paper is executed in Plaxis software using the soft-soil creep model in contrast to the calculation using the composite model of MSW. All the characteristics for SSC-model were derived from the composite model. The comparative results demonstrate the advantage of SSC-model for prediction of the development of MSW stress-strain state. As far as after the completion of the biodegradation processes MSW behaviour is similar to cohesion-like soils, the demonstrated approach seems to be useful for the design of waste piles as the basement for different constructions considering it as one of remediation techniques for the territories occupied by the old waste.

DOI: 10.22227/1997-0935.2014.9.82-92

- Kockel R., Jessberger H.L. Stability Evaluation of Municipal Solid Waste Slopes. Proceedings of 11th European Conference for Soil Mechanics and Foundation Engineering. Copenhagen, Denmark, Danish Geotechnical Society, 1995, vol. 2, pp. 73—78.
- Manassero M., Van Impe W.F, Bouazza A. Waste Disposal and Containment. Proceedings of 2nd International Congress on Environmental Geotechnics. Rotterdam, A.A. Balkema, 1996, vol. 3, pp. 1425—1474.
- Sivakumar Babu G.L., Reddy K.R., Chouskey S.K., Kulkarni H.S. Prediction of Longterm Municipal Solid Waste Landfill Settlement Using Constitutive Model. Practice Periodical of Hazardous, Toxic and Radioactive Waste Management. New York, ASCE, 2010, vol. 14, no. 2, pp. 139—150. DOI: http://dx.doi.org/10.1061/(ASCE)HZ.1944-8376.0000024.
- Sivakumar Babu G.L., Reddy K.R., Chouskey S.K. Constitutive Model for Municipal Solid Waste Incorporating Mechanical Creep and Biodegradation-induced Compression. Waste Management. Amsterdam, Elsevier, 2010, vol. 30, no. 1, pp. 11—22. DOI: http://dx.doi.org/10.1016/j.wasman.2009.09.005.
- Sivakumar Babu G.L., Reddy K.R., Chouskey S.K. Parametric Study of MSW Landfill Settlement Model. Waste Management. Amsterdam, Elsevier, 2011, vol. 31, no. 6, pp. 1222—1231. DOI: http://dx.doi.org/10.1016/j.wasman.2011.01.007.
- Sivakumar Babu G.L. Evaluation of Municipal Solid Waste Characteristics of a Typical Landfill in Bangalore. Bangalore, India, India Institute of Science, 2012. Available at: http://cistup.iisc.ernet.in/presentations/Research%20project/CIST038.pdf/. Date of access: 02.04.2014.
- Brinkgreve R.B.J., Vermeer P. On the Use of Cam-Clay Models. Proceedings of the IV International Symposium on Numerical Models in Geomechanics. Rotterdam, Balkema, 1992, vol. 2, pp. 557—565.
- Burland J.B. The Yielding and Dilation of Clay. Geotechnique, London, Thomas Telford Limited, 1965, vol. 15, no. 3, pp. 211—214.
- Burland J.B. Deformation of Soft Clay. PhD thes. Cambridge, UK, Cambridge University, 1967, 500 p.
- Brinkgreve R.B.J. Material Models. Plaxis 2D — Version 8. Rotterdam, A.A. Balkema, 2002, pp. 6-1—6-20.
- Brinkgreve R.B.J. Geomaterial Models and Numerical Analysis of Softening, Dissertation. Delft, Delft University of Technology, 1994. Available at: http://adsabs.harvard.edu/abs/1994PhDT........15B/. Date of access: 02.04.2014.
- Stolle D.F.E., Bonnier P.G., Vermeer P.A. A Soft Soil Model and Experiences with Two Integration Schemes. Numerical Models in Geomechanics. Leiden, Netherlands, CRC Press, 1997, pp. 123—128.
- Gibson R.E., Lo K.Y. A Theory of Soils Exhibiting Secondary Compression. Acta Polytechnica Scandinavica, Civil Engineering and Building Construction Series. Stockholm, Scandinavian Council for Applied Research, 1961, C 10, 196, pp. 225—239.
- Park H.I., Lee S.R. Long-term Settlement Behavior of Landfills with Refuse Decomposition. Journal of Solid Waste Technology and Management. Chester, USA, Widener University, 1997, vol. 24, no. 4, pp. 159—165.
- Murthy V.N.S. Geotechnical Engineering: Principles and Practices of Soil Mechanics and Foundation Engineering. New York, Marcel Dekker, Inc., 2003, 1056 p.

Pages 93-99

This article focuses on the method of improving shear stresses calculation accuracy based on the experimental data. It was proven that shear stresses value considerably changes (even up to change of sign from positive to negative) depending on different velocity fluctuations amount (or length). Experimental database consists of velocity in turbulent flow at different times. Recommendations for practical use of methods of calculation depending on the type of engineering problems are presented. The method of finding optimal amount of the experimental database is proposed by the analysis of the values convergence of the standard deviations calculated for the whole sample and the standard deviation calculated by increasing interval. The calculation results for these intervals are at the points of the measuring system and the hypothesis about finding the optimal length of implementation is offered. The steps for further research are set out.

DOI: 10.22227/1997-0935.2014.9.93-99

- Ivanov B.N. Mir fizicheskoy gidrodinamiki: Ot problem turbulentnosti do fiziki kosmosa [World of Physical Hydrodynamics: From Turbulence Problems to Space Physics]. Moscow, Editorial URSS Publ., 2002, 239 p.
- Loytsyanskiy L.G. O nekotorykh prilozheniyakh metoda podobiya v teorii turbulentnosti [On Some Applications of Similarity Method in Turbulence Theory]. Prikladnaya matematika i mekhanika [Applied Mathematics and Mechanics]. 1935, vol. 2, no. 2, pp. 180—206.
- Tarasov V.K., Volgina L.V., Gusak L.N. Prostranstvennye sostavlyayushchie turbulentnoy vyazkosti [Spatial Components of the Turbulent Viscosity]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2008, no. 1, ðð. 221—224.
- Borovkov V.S. Ruslovye protsessy i dinamika rechnykh potokov na urbanizirovannykh territoriyakh [Channel Processes and Dynamics of River Flows in Urbanized Territories]. Leningrad, Gidrometeoizdat Publ., 1989, 286 p.
- Volgina L.V. Vliyanie vida korrelyatsionnoy funktsii na metody opredeleniya makrostruktur turbulentnogo potoka [Influence of Correlation Function Type on the Methods of Identifying Macrostructures of Turbulent Flow]. 2 Mezhdunarodnaya (7 traditsionnaya) NTK molodykh uchenykh, aspirantov i doktorantov [2nd International (7th Traditional) Scientific and Technical Conference of Young Researchers, Postgraduates and Doctoral Students]. Moscow, MGSU Publ., 2004, pp. 204—211.
- Tarasov V.K., Gusak L.N., Volgina L.V. Dvizhenie dvukhfaznykh sred i gidrotransport [Motion of Biphasic Media and Hydrotransport]. Moscow, MGSU Publ., 2012, 92 p.
- Volgina L.V. Izmeneniye masshtaba turbulentnostI i kasatel'nykh napryazheniy treniya pri rezkom izmenenii uklona [Changing the Scale of Turbulence and Shear Stresses in Case of Abrupt Change of Frictions Lope]. Materialy pyatoy NTK molodykh uchenykh, aspirantov i doktorantov [Proceedings of the Fifth Scientific and Technical Conference of Young Researchers, Postgraduates and Doctoral Students]. Moscow, MGSU Publ., 2001, pp. 200—211.
- Smol'yakov A.V., Tkachenko V.M. Izmerenie turbulentnykh pul'satsiy [Measurement of Turbulent Fluctuations]. Leningrad, Energiya Publ., 1980, 264 p.
- Okulov V.L., Naumov I.V., Sorensen Zh.N. Osobennosti opticheskoy diagnostiki pul'siruyushchikh techeniy [Features of the Optical Diagnostics of Fluctuating Flows]. Zhurnal tekhnicheskoy fiziki [Technical Physics Journal]. 2007, vol. 77, no. 5, pp. 47—57.
- Bryanskaya Yu.V., Markova I.M., Ostyakova A.V. Gidravlika vodnykh i vzvesenesushchikh potokov v zhestkikh i deformiruemykh granitsakh [Hydraulics of Water Flows and Suspended Matter Bearing Flows in Rigid and Deformable Borders]. Moscow, ASV Publ., 2009, 264 p.
- Taryshkin R.A., Sabrirzyanov A.N., Fafurin V.A., Fefelov V.V., Yavkin V.B. Primeneniye RANS modeley turbulentnosti dlya rascheta raskhoda v raskhodomere so standartnoy diafragmoy [Application of RANS Turbulence Models to Calculate the Flow in the Flow Meter with a Standard Diaphragm]. Vestnik Udmurtskogo universiteta. Mekhanika [Proceedings of Udmurt State University. Mechanics]. 2010, no. 2, pp. 109—115.
- Volynov M.A. Vliyaniye planovoy geometrii rechnogo rusla na diffuziyu i dispersiyu primesey [Influence of Planned Geometry of the Riverbed on the Diffusion and Dispersion of Contaminants]. Fundamental'nyye issledovaniya [ Fundamental Research]. 2013, no. 6, part 3, pp. 535—540.
- Cellino M., Graf W.H. Sediment-laden Flow in Open-channels under Noncapacity and Capacity Conditions. Journal of hydraulic engineering. 1999, vol. 125, no. 5, pp. 455—462. DOI: http://dx.doi.org/10.1061/(ASCE)0733-9429(1999)125:5(455).
- Lyakhter V.M. Turbulentnost’ v gidrosooruzheniyakh [Turbulence inside Hydraulic Structures]. Moscow, Energiya Publ., 1968, 408 p.
- Zapryagayev V.I., Kavun I.N. Eksperimental'noye issledovanie vozvratnogo techeniya v peredney otryvnoy oblasti pri pul'satsionnom rezhime obtekaniya tela s igloy [Experimental Study of the Reverse Flow in the Separation Region in Front of a Pulsating Flow Regime of the Body with a Needle]. Prikladnaya mekhanika i tekhnicheskaya fizika [Applied Mechanics and Technical Physics]. 2007, vol. 48, no. 4, pp. 30—39.

Pages 100-105

In the process of calculating and simulating water discharge in free channels it is necessary to know the flow features in case of small values of Reynolds and Weber numbers. The article considers the influence of viscosity and surface tension on the coefficient of a weir flow with sharp threshold. In the article the technique of carrying out experiments is stated, the equation is presented, which considers the influence of all factors: pressure over a spillway threshold, threshold height over a course bottom, speed of liquid, liquid density, dynamic viscosity, superficial tension, gravity acceleration, unit discharge, the width of the course. The surface tension and liquid density for the applied liquids changed a little. In the rectangular tray (6000x100x200) spillway with a sharp threshold was established. It is shown that weir flow coefficient depends on Reynolds number (in case Re < ~ 2000) and Webers number. A generalized expression for determining weir flow coefficient considering the influence of the forces of viscosity and surface tension is received.

DOI: 10.22227/1997-0935.2014.9.100-105

- Linford A. The Application of Models to Hydraulic Engineering – Reservoir Spillways. Water and Water Engineering. October, 1965, pp. 351—373.
- Engel F., Stainsby W. Weirs for Flow Measurement in Open Channels. Part 2. Water and Water Engineering. 1958, vol. 62, no. 747, pp. 190—197.
- Kindsvater C., Carter R. Discharge Characteristics of Rectangular Thin-plate Weirs. Transactions ASCE, 1957, vol. 122, pp. 772—822.
- Spronk R. Similitude des ecoulements Sur les deversoirs en mince paroi aux faibles charges. Rev. Univers. mines. 1953, vol. 3, no. 9, pp. 119—127.
- Hager W. Ausfluss durch vertikale offnungen. Wasser, Energ. Luft. 1988, vol. 80, no. 3—4, pp. 73—79.
- Al’tshul’ A.D., Medzveliya M.L. Ob usloviyakh otryva prilipshey strui na vodoslive s ostrym porogom [On the Conditions of Separating the Stuck Flood on the Weir with a Sharp Threshold]. Izvestiya vuzov: Stroitel’stvo [News of the Institutions of Higher Education]. 1991, no. 11, pp. 73—76.
- Medzveliya M.L., Pipiya V.V. Koeffitsient raskhoda vodosliva s shirokim porogom v oblasti malykh naporov [Discharge Ratio of the Broad-crested Weir Flow in the Low Head Area]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 4, pp. 167—171.
- Medzveliya M.L., Pipiya V.V. Usloviya obrazovaniya svobodnoy strui na vodoslive s ostrym porogom [Conditions of Formation of a Free Flow over a Sharp Crest Weir]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 1, pp. 185—189.
- Al’tshul’ A.D. Istechenie iz otverstiy zhidkostey s povyshennoy vyazkost’yu [Efflux of Liquids with Elevated Toughness]. Neftyanoe khozyaystvo [Oil Industry]. 1950, no. 2, pp. 55—60.
- Jameson A. Flow over Sharp-edged Weirs. Effect of Thickness of Crest . J. Inst. of Civil Engrs. Nov. 1948, vol. 31, no. 1, pp. 36—55. DOI: http://dx.doi.org/10.1680/IJOTI.1948.13377.
- D’Alpaos L. Sull’efflusso a stramazzo al di sopra di un bordo in parete sottile perpiccolshi valori del carico. Atti ist. Veneto sci lett. ed arti. Cl, sci mat. e natur. 1976—1977, vol. 135, pp. 169—190.
- Shchapov N.M. Gidrometriya gidrotekhnicheskikh sooruzheniy i gidromashin [Hydrometry of Hydraulic Engineering Structures and Hydraulic Units]. Moscow, Leningrad, Gosenergoizdat Publ., 1957, 235 p.
- Raju K.G.R., Asawa G.L. Viscosity And Surface Tension Effects On Weir Flow. J. of the Hydraulic Engineering, ASCE. 1977, vol. 103, no. 10, pp. 1227—1231.
- Rosanov N., Rosanova N. Some Problems of Modeling Water Outlet Structures with Free — Surface Flow. Proc. 19 IAHR congr. New-Delhi, 1981, vol. 5, pp. 81—91.
- Molitor D.A. Hydraulics of Rivers, Weirs and Sluices. 1st ed. New York : John Wiley & Sons; London : Chapman & Hall, Limited. 1908. 178 p.

Pages 106-115

In the article the authors estimate the possibility of building a high (100 m high) stone dam with clay-cement concrete diaphragm. This diaphragm is used as an antifiltering element and it is made of secant piles method of clay-cement concrete (method of "slurry wall"). This diaphragm should be constructed in several phases, in our example example in three stages. Numerical studies of the stress-strain state of such a dam show that considerable compressive stresses can appear in the diaphragm. These stresses can be significantly (3...4 times) greater than the strength of clay-cement concrete in compression. However it should be taken into consideration that the diaphragm of such a high dam will be crimped by horizontal stresses, i.e. clay-cement concrete will operate in the triaxial compression. Under these conditions the strength of clay-cement concrete will be significantly higher, therefore, the diaphragm reliability might be provided with a margin. For this reason, the most important issue in the engineering of a high dam with such type of diaphragm is to select the required composition of clay-cement concrete. Increasing its strength by extension of the cement fraction could increase modulus of deformation. Therefore it could lead to compressive stress increase and the strength state degradation. Hydrostatic pressure generates the areas of tensile stresses in the clay-cement concrete diaphragm due to the arising bending deformation. It threatens the formation of cracks in the clay-cement concrete, especially in the nodes interface diaphragm queues. It is recommended to match the diaphragm queues using ferroconcrete galleries. This should ensure flexibility of deformation between the gallery and the diaphragm.

DOI: 10.22227/1997-0935.2014.9.106-115

- Korolev V.M., Smirnov O.E., Argal E.S., Radzinskiy A.V. Novoe v sozdanii protivofil'tratsionnogo elementa v tele gruntovoy plotiny [New Things in the Creation of Antifiltering Element in the Body of a Subsurface Dam]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2013, no. 8, pp. 2—9.
- Kudrin K.P., Korolev V.M., Argal E.S., Solov'eva E.V., Smirnov O.E., Radzinskiy A.V. Ispol'zovanie innovatsionnykh resheniy pri sozdanii protivofil'tratsionnoy diafragmy v peremychke Nizhne-Bureyskoy GES [Using Innovative Solutions to Create Impervious Diaphragm in the Jumper of Lower Bureyskaya HPP]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2014, no. 7, pp. 22—28.
- Radchenko V.G., Lopatina M.G., Nikolaychuk E.V., Radchenko S.V. Opyt vozvedeniya protivofil'tratsionnykh ustroystv i gruntotsementnykh smesey [Experience in the Construction of Antifiltering Devices and Soil-cement Compositions]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2012, no. 6, pp. 46—54.
- Gol'din A.L., Rasskazov L.N. Proektirovanie gruntovykh plotin [Engineering of Soil Dams]. 2nd edition. Moscow, ASV Publ., 2001, 375 p.
- Rasskazov L.N., Radzinskiy A.V., Sainov M.P. Vybor sostava glinotsementobetona pri sozdanii «steny v grunte» [Choice of Clay Cement Concrete to Create "Slurry Trench" Cutoff Wall]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2014, no. 3, pp. 16—23.
- Rasskazov L.N., Radzinskiy A.V., Sainov M.P. K prochnosti glinotsementobetona [To the Problem of Clay-cement Concrete Strength]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2014, no. 8, pp. 26—28.
- Rasskazov L.N., Radzinskiy A.V., Sainov M.P. Prochnost' i deformativnost' glinotsementobetona v slozhnonapryazhennom sostoyanii [Strength and Deformability of Clay-cement Concrete in Complex Stress State]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2014, no. 8, pp. 29—33.
- Rasskazov L.N., Radzinskiy A.V., Sainov M.P. Plotiny s glinotsementobetonnoy diafragmoy. Napryazhenno-deformirovannoe sostoyanie i prochnost' [Dams with Clay-cement Concrete Diaphragm. Stress-strain State and Strength]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 2014, no. 9, pp. 37—44.
- Malyshev L.I., Rasskazov L.N., Soldatov P.V. Sostoyanie plotiny Kureyskoy GES i tekhnicheskie resheniya po ee remontu [The Condition of Kureyskaya Hydraulic Power Station Dam and Technical Solutions for its Repair]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 1999, no. 1, pp. 31—36.
- O`Brien S., Dann C., Hunter G., Schwermer M. Construction of the Plastic Concrete Cut-off Wall at Hinze Dam. ANCOLD Proceedings of Technical Groups. Available at: http://www.bauerdamcontractors.com/export/sites/www.bauerdamcontractors.com/en/pdf/publications/Cutoff-Wall-Paper-09-ANCOLD-Conference---Final.pdf/. Date of access: 25.05.2014.
- Fedoseev V.I., Shishov I.N., Pekhtin V.A., Krivonogova N.F., Kagan A.A. Protivofil'tratsionnye zavesy gidrotekhnicheskikh sooruzheniy na mnogoletney. Opyt proektirovaniya i proizvodstva rabot merzlote [Antifiltering Curtain of Hydraulic Structures on Permafrost. Design Experience and Production]. Vol. 2, Saint Petersburg, VNIIG im. B.E. Vedeneeva Publ., 2009, pp. 303—316.
- Powell R.D., Morgenstern N.R. Use and Performance of Seepage Reduction Measures. Proc. Symp. Seepage and Leakage from Dams and Impoundments. American Society of Civil Engineers. Denver, CO, USA, 1985, pp. 158—182.
- Baltruschat M., Banzhaf P., Beutler S., Hechendorfer S. Cut-off Wall for the Strengthening of the Sylvenstein Reservoir (70 km south of Munich, Germany) : Cut-off Wall executed with BAUER cutter and grab and Plastic Concrete. BAUER Spezialtiefbau GmbH. Available at: http://www.bauerdamcontractors.com/export/sites/www.bauerdamcontractors.com/en/pdf/publications/paper_HYDRO-2013_bmi_2013_08_24_spa-bz_B_short.pdf. Date of access: 25.05.2014.
- Sainov M.P. Vychislitel'naya programma po raschetu napryazhenno-deformirovannogo sostoyaniya gruntovykh plotin: opyt sozdaniya, metodiki i algoritmy [Computer Program for the Calculation of the Stress-strain State of Soil Dams: the Experience of Creation, Techniques and Algorithms]. International Journal for Computational Civil and Structural Engineering. 2013, vol. 9, no. 4, pp. 208—225.
- Rasskazov L.N. Dzhkha Dzh. Deformiruemost' i prochnost' grunta pri raschete vysokikh gruntovykh plotin [Deformability and Strength of the Soil in the Calculation of High Soil Dams]. Gidrotekhnicheskoe stroitel'stvo [Hydraulic Engineering]. 1987, no. 7, pp. 31—36.
- Sainov M.P. Parametry deformiruemosti krupnooblomochnykh gruntov v tele gruntovykh plotin [Deformability Parameters of Coarse Soils in the Body of Soil Dams]. Stroitel'stvo: nauka i obrazovanie [Construction: Science and Education]. 2014, no. 2. Available at: http://www.nso-journal.ru/public/journals/1/issues/2014/02/2_Sainov.pdf. Date of access: 25.05.2014.
- Sainov M.P. Osobennosti chislennogo modelirovaniya napryazhenno-deformirovannogo sostoyaniya gruntovykh plotin s tonkimi protivofil'tratsionnymi elementami [Numerical Modeling of the Stress-Strain State of Earth Dams That Have Thin Rigid Seepage Control Elements]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 10, pp. 102—108.

Pages 116-122

This article deals with the problem of criteria optimization in order to objectively evaluate the experience of an applicant (a project organization) and the quality of a design product (project documentation). The methodology to be developed is based on introduction of new evaluation criteria (sub-criteria) that in conjunction with the applicable criteria specified by the Law on the Contract System will allow developing the optimal procedure to evaluate competitive bids of the participants in tenders and determining the most appropriate candidate, with whom the contract will be further concluded. The article analyzes the existing criteria and their interaction with each other and describes the specifics of tenders for design in the form of open competition. The list decreases to three criteria, such as "contract price", "quality, functional and environmental characteristics of a procurement facility", "qualification of procurement participants, including availability of financial resources, equipment and other material resources necessary for the execution of the contract material resources, the presence of goodwill, professionals and other employees of a certain experience level". However, in order to upgrade the quality of assurance procedures for the design works to be performed, it was decided to apply new evaluation criteria (sub-criteria) components, such as "availability of positive findings of the state out-of-departmental examination that are similar to the subject of competition, on a participant in placement of order", "availability of the certificate on approval of architectural and urban planning decisions that are similar to the subject of competition, on a participant in placement of order", "availability of the permit for the commissioning of facilities that are similar to the subject of competition, on a participant in placement of order", "availability of the contract for designer's supervision with a participant in placement of order". The article describes in detail the above evaluation criteria (sub-criteria) and presents a new procedure of evaluation of competitive bids, which will allow combining its new components with those existing under the law and giving the actual result of their interaction with each other in determination of a winner, i.e. a more well-deserved candidate (a tenderer). Thus the requirements given above are met, the participants in order placement will be able to declare themselves as organizations that are highly skilled, fair and able to perform the high-quality design works, know how to perform work in due time and in strict compliance with the current regulations of the Russian Federation and are able not only to show a creative approach to solving the objectives, but also to create a project characterized by both architectural and artistic aesthetics and its high technological effectiveness.

DOI: 10.22227/1997-0935.2014.9.116-122

- O kontraktnoy sisteme v sfere zakupok tovarov, rabot, uslug dlya obespecheniya gosudarstvennykh i munitsipal'nykh nuzhd : Federal'nyy zakon ot 05.04.2013 ¹ 44-FZ. s izmeneniyami i dopolneniyami ot: 02.07, 28.12.2013 g., 04.06, 2107.2014 g. [Federal Law No. 44-FZ from 05.04.2013 On the Contract System in the Procurement of Goods, Works and Services to Meet the State and Municipal Needs. With Amendments and Additions from 02.07, 28.12.2013, 04.06, 2107.2014]. Available at: http://base.garant.ru/70353464/1/#block_1000. Date of access: 20.07.2014.
- Ob utverzhdenii Pravil otsenki zayavok, okonchatel'nykh predlozheniy uchastnikov zakupki tovarov, rabot, uslug dlya obespecheniya gosudarstvennykh i munitsipal'nykh nuzhd : Postanovlenie Pravitel'stva RF ot 28.11.2013 g. ¹ 1085 [Resolution of the Government of the Russian Federation No. 1085 dated 28.11.2013 On Approval of the Rules for Evaluating Bids and Final Offers of the Participants of Procurement of Goods, Works and Services to Meet the State and Municipal Needs]. Available at: http://ivo.garant.ru/SESSION/PILOT/main.htm. Date of access: 20.07.2014.
- Ob optimizatsii poryadka utverzhdeniya arkhitekturno-gradostroitel'nykh resheniy ob"ektov kapital'nogo stroitel'stva v gorode Moskve : Postanovlenie Pravitel'stva Moskvy ¹ 284-PP ot 30.04.2013 g. s izmeneniyami i dopolneniyami ot 14.05.2014 g. [Resolution of the Government of Moscow No. 284-PP dated 30/04/2013 On Optimization of the Procedure for Approval of Architectural and Town Planning Concepts of Capital Construction Projects in the City of Moscow. With Amendments and Additions from 14.05.2014]. Available at: http://base.garant.ru/70373462. Date of access: 20.07.2014.

Pages 123-137

The design decision is usually a synthesis of various requirements to the construction object. The main difficulty is to approve the solution results of all the subtasks, because these various requirements often contradict each other. In the article the existing approaches to design solutions searching for steel structural designs are considered, features of standard and individual design are specified. The associative method of choosing the design decision is offered. The process of search is directed in order to receive favorable coincidence of design situations, current and implemented earlier and to apply the approved decisions. In order to consider the greatest possible quantity of combinations of design solution for structural designs in the article it is offered to create a tree of enumeration of possibilities for decisions, in case of which the possible values of decision parameters vary. The algorithm of searching the design decision is shown by a method of a tree of search creation. Three levels of solution for a problem of steel structural designs are thus described. Also the question is raised of the effectiveness of padding expenses for creating the complete tree of search of options, their analysis and assessment.

DOI: 10.22227/1997-0935.2014.9.123-137

- Naginskaya V.S. Avtomatizatsiya arkhitekturno-stroitel'nogo proektirovaniya [Automation of Architectural and Construction Design]. Moscow, Stroyizdat Publ., 1979, 175 p.
- Ignatov V.P., Ignatova E.V. Evristiki dannykh v stroitel'nom proektirovanii [Data Heuristics in Construction Design]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2009, no. 2, pp. 226—229.
- Kilina A.A., Parinov M.V., Chizhov M.I. Arkhitektura sistemy podderzhki prinyatiya i kontrolya proektnykh resheniy [Architecture of Support System for Design Decision Making and Control]. Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta [Proceedings of Voronezh State Technical University]. 2011, vol. 7, no. 12-2, pp. 41—44.
- Agafonkina N.V., Karpov Yu.A., Stegantsev D.N. Model' odnokriterial'nogo prinyatiya resheniy v usloviyakh neopredelennosti [Model of One-Criteria Decision Making in the Conditions of Uncertainty]. Vestnik Voronezhskogo gosudarstvennogo tekhnicheskogo universiteta [Proceedings of Voronezh State Technical University]. 2009, vol. 5, no. 6, pp. 36—37.
- Veera P. Darji, Ravipudi V. Rao. Application of AHP/EVAMIX Method for Decision Making in the Industrial Environment. American Journal of Operations Research. 2013, no. 3, pp. 542—569. Available at: http://www.scirp.org/journal/PaperInformation.aspx?PaperID=39747#.VA18gPnV9cQ. Date of access: 03.06.2014. DOI: http://dx.doi.org/10.4236/ajor.2013.36053.
- Dixon J.R. Design Engineering: Inventiveness, Analysis, and Decision Making. New York, McGraw-Hill, 1966, 354 p.
- Hill P. Nauka i iskusstvo proektirovaniya. Metody proektirovaniya, nauchnoe obosnovanie resheniy [Design Science and Art. Design Methods, Scientific Rationale of Solutions]. Moscow, Mir Publ., 1973, 262 p.
- Botvinnik M.M. O reshenii netochnykh perebornykh zadach [On Solving Unprecise Brute Tasks]. Moscow, Sovetskoe radio Publ., 1979, 152 p.
- Novikova A.N. Opyt optimizatsii proektnogo protsessa na primere real'nogo ob"ekta v g. Kazani [Experience of Optimizing Design Process on the Example of Real Object in Kazan]. Izvestiya KGASU [Proceedings of Kazan State University of Architecture and Engineering]. 2011, no. 4 (18), pp. 100—106.
- Khanina A.B., Alekhin V.N. Vnedrenie ekspertnykh sistem v protsesse proektirovaniya stroitel'nykh konstruktsiy [Expert Systems Implementation in the Process of Building Structures Design]. Akademicheskiy vestnik UralNIIproekt RAASN [Academic Proceedings of UralNIIproject of the Russian Academy of Architecture and Construction Sciences]. 2011, no. 2, pp. 82—85.
- Koch C., Buhl H. "Integrated Design Process" a Concept for Green Energy Engineering. Engineering. 2013, vol. 5, no. 3, pp. 292—298. Available at: http://www.scirp.org/journal/PaperInformation.aspx?PaperID=28771#.VA2GHvnV9cQ. Date of access: 03.06.2014. DOI: http://dx.doi.org/10.4236/eng.2013.53039.
- Ginzburg A.V., Vasil'kin A.A. Postanovka zadachi optimal'nogo proektirovaniya stal'nykh konstruktsiy [Problem Statement for Optimal Design of Steel Structures]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2014, no. 6, pp. 52—62.
- Zhavnerov P.B., Ginzburg A.V. Povyshenie organizatsionno-tekhnologicheskoy nadezhnosti stroitel'stva za schet strukturnykh meropriyatiy [Using Structural Actions to Improve Organizational and Technological Reliability of Construction Activities]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 3, pp. 196—200.

Pages 138-144

The discrete analysis methods, in particular the theory of graphs, are widely recognized as a tool for building mathematical model, including in construction. In the process of design documentation formation there always appears the necessity to plan project networks. At the present moment there is no reasonable generic program, which helps the designer to rapidly solve this task. The authors present the possibilities of using the generic program for Windows developed by them. The program allows solving key tasks of the theory of graphs. These tasks include the search (calculation) of the critical (project network planning) or optimal (resources delivery variant) path in the graph. The process (user interface) of graph formation corresponding to the target network in frames of the program is described. On the stage of construction project development there always appears a task of visual image of workflow process as a graph. So the project network is an image of an object erection. At that the events are depicted as rings, and works - as branches (arrows). The general view of the dialog box with the description of the possibilities of editing (adding and deleting vertexes and edges), saving the document, reading the document from file as well as optimal and critical paths are presented.

DOI: 10.22227/1997-0935.2014.9.138-144

- Klashanov F. Theoretical Base of the Building to Models of Management in Construction. Computing in Civil and Building Engineering. 2014, pp. 975—980. Available at: http://ascelibrary.org/doi/abs/10.1061/9780784413616.121. Date of access: 03.06.2014. DOI: http://dx.doi.org/10.1061/9780784413616.121.
- Klashanov F.K. Metody i metodologiya formalizatsii prinyatiya resheniya v stroitel'stve [Methods and Methodology of Decision Making Formalization in Construction]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 1, vol. 1, pp. 331—338.
- Golovan' A.M., Klashanov F.K., Petrova S.N. Oblachnye vychisleniya [Cloud Computing]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 6, pp. 411—417.
- Klashanov F.K. Primenenie metasistemnogo analiza v stroitel'stve [Using Metasystem Analysis in Construction]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2010, no. 4, vol. 1, pp. 228—234.
- Cormen T.H., Leiserson C.E., Rivest R.L., Stein C. Introduction to Algorithms. The MIT Press, 2009, 3rd edition, 1312 p.
- Nikanorov S.P. Rasshirenie predmeta teorii grafov [Expansion of the Graph Theory Subject]. Sistemnoe upravlenie. Problemy i resheniya [System Management. Problems and Solutions]. 2007, no. 8. Available at: http://www.supir.ru/index.php?m=articles&article_id=33. Date of access: 03.06.2014.
- Sarkar M.S. GXL: a New Graph Transformation Language. Proc. of the 42nd Annual Southeast Regional Conference. ACM New York, 2004, pp. 336—340.
- Kleyn M.F., Browne J.C. A High Level Language for Specifying Graph-Based Languages and their Programming Environments. Proc. of the 15th International Conference on Soft-ware Engineering. IEEE Computer Society Press Los Alamitos, CA, USA, 1993, pp. 324—335. DOI: http://dx.doi.org/10.1109/ICSE.1993.346032.
- Lin Y. A Recognition Problem in Converting Linear Programming to Network Flow Models. Appl. Math. J. Chinese Univer. 1993, vol. 8, no. 1, pp. 76—85.
- Geisberger R., Sanders P., Schultes D., Delling D. Contraction Hierarchies: Faster and Simpler Hierarchical Routing in Road Networks. International Workshop on Experimental Algorithms (WEA 2008). Provincetown, Springer, 2008, pp. 319—333.
- Gunawan A., Ng K.M., Poh K.L. Solving the Teacher Assignment-Course Scheduling Problem by a Hybrid Algorithm. Int. J. Comput. Inform. Engin. 2007, vol. 1, no. 2, pp. 137—142.
- Sorokin A.A. Razrabotka programmnogo kompleksa dlya issledovaniya telekom-munikatsionnykh sistem s dinamicheskoy topologiey seti [Software Development for the Investigation of Telecommunication Systems with Dynamic Network Topology]. Vestnik Astrakhanskogo gosudarstvennogo tekhnicheskogo universiteta. Seriya: upravlenie, vychislitel’naya tekhnika i informatika [Bulletin of the Astrakhan State Technical University. Series: Management, Computer Engineering, Computer Science]. 2011, no. 2, pp. 137—142.
- De Loera J.A., Kim E.D., Onn S., Santos F. Graphs of Transportation Polytopes. Journal of Combinatorial Theory — JCT. Ser. A, 2009, vol. 116, no. 8, pp. 1306—1325. DOI: http://dx.doi.org/10.1016/j.jcta.2009.03.010.
- Popkov V.K., Toktoshov G.Y. Gipersetevaya tekhnologiya optimizatsii inzhenernykh setey v gornoy ili peresechennoy mestnosti [Hyper Network Technology of Optimizing the Engineering Networks at Mountainous and Broken Area]. Vestnik Buryatskogo gosudarstvennogo universiteta [Proceedings of Buryat State University]. 2010, no. 9, pp. 276—282.
- Dijkstra E.W. A Note on Two Problems in Connexion with Graphs. Numerische Mathematik. 1959, vol. 1, no. 1, pp. 269—271. DOI: http://dx.doi.org/10.1007/BF01386390.

Pages 145-153

The physical reasons for building structures destruction are both the forces arising at stress-strain state of construction elements and external influences arising at emergency situations, as well as their moments, impulses and periodic impulses with the frequencies close to of fluctuations frequencies of construction elements. We shall call the mathematical calculation models for the parameters-reasons of destructions the basic models. The basic models of destruction of building structures elements allow not only providing necessary level of reliability and survivability of the elements and the construction as a whole already at the stage of their design, but also giving the chance, at their corresponding completion, to provide rational decisions on the general need of recovery works and their volume depending on destruction level. Especially important for rational design decisions development, which ensure the demanded constructional safety of building structures, is library creation of the basic mathematical models of standard processes of bearing elements destructions for standard construction designs for the purpose of the further forecast (assessment) of the level and probabilities of standard destructions. Some basic mathematical models of destructions processes of the standard elements of building structures are presented in the present article. A model of accounting for construction defects and a model of obtaining requirements to probabilities of partial destructions of a construction are given. Both of these models are probabilistic.

DOI: 10.22227/1997-0935.2014.9.145-153

- Almazov V.O., Cao Duy Kh?i. Dinamika progressiruyushchego razrusheniya monolitnykh mnogoetazhnykh karkasov [Dynamics of Progressing Destruction of Monolithic Multystoried Frameworks]. Promyshlennoe i grazhdanskoe stroitel'stvo [Industrial and Civil Engineering]. 2010, no. 4, pp. 52—56.
- Bartolomey M.L. Chislennyy analiz protsessa razvitiya treshchin pri neravnomernykh osadkakh sooruzheniya [The Numerical Analysis of Crack Development at Uneven Settlement of a Construction]. Vychislitel'naya mekhanika sploshnykh sred [Computing Mechanics of Continuous Media]. 2012, vol. 5, no. 2, pp. 217—224.
- Gar'kin I.N. Analiz prichin obrusheniy promyshlennykh zdaniy [Analysis of the Reasons of Industrial Buildings Collapse]. Tekhnicheskie nauki: problemy i perspektivy : materialy Mezhdunarodnoy nauchnoy konferentsii (g. Sankt-Peterburg, mart 2011) [Technical Sciences: Problems and Prospects : Materials of the International Conference (Saint Petersburg, March 2011)]. Saint Petersburg, Renome Publ., 2011, pp. 27—29.
- Cao Duy Kh?i. Problema dinamicheskogo kharaktera vozdeystviy pri progressiruyushchem razrushenii [The Problem of the Dynamic Character of the Influences in Case of Progressive Collapse]. Stroitel'stvo — formirovanie sredy zhiznedeyatel'nosti : sbornik trudov 13-y Mezhdunarodnoy mezhvuzovskoy nauchno-prakticheskoy konferentsii molodykh uchenykh, aspirantov i doktorantov [Construction — Formation of Life Environment : Research Works of the 13th International Inter-university Science and Practice Conference of Young Researchers, Doctoral Students and Postgraduates]. Moscow, MGSU Publ., 2010, pp. 28—32.
- Soldatenko T.N. Model' identifikatsii i prognoza defektov stroitel'noy konstruktsii na osnove rezul'tatov ee obsledovaniya [Model of Identification and Forecast of Construction Design Defects on the Basis of its Inspection Results]. Inzhenerno-stroitel'nyy zhurnal [Engineering and Construction Magazine]. 2011, no. 7 (25), pp. 52—61.
- Yun' O.M. Proizvodstvo i logika: Informatsionnye osnovy razvitiya [Production and Logic: Information Bases of Development]. Moscow, Novyy vek Publ., 2001, 168 p.
- Calgaro J.-A., Gulvanessian H. Management of Reliability and Risk in the Eurocode System. Safety, Risk, and Reliability — Trends in Engineering. International Conference. Malta, 2001, pp. 155—160.
- Korn G., Korn T. Spravochnik po matematike (dlya nauchnykh rabotnikov i inzhenerov) [The Reference Book on Mathematics (for Scientists and Engineers)]. Moscow, Nauka Publ., 1973, 831 p.
- Ermakov V.A., Korgin A.B. Metodika MKE-otsenki nesushchey sposobnosti konstruktsiy s uchetom nalichiya defektov [Methods of FEM Estimation of the Bearing Capacity of Structures with Account for Imperfections]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2009, Special Issue no. 1, pp. 26—28.
- Belostotskiy A.M., Pavlov A.S. Raschet konstruktsiy bol'sheproletnykh zdaniy s uchetom fizicheskoy, geometricheskoy i konstruktivnoy nelineynostey [Calculation of the Designs of Wide-span Buildings Taking into Account Physical, Geometrical and Constructive Nonlinearities]. International Journal for Computational Civil and Structural Engineering. 2010, vol. 6, no. 1—2, pp. 80—87.
- Krivosheina M.N., Tuch E.V., Kobenko S.V. Vliyanie ucheta snizhennykh mekhanicheskikh svoystv v vysotnom napravlenii pregrad na ikh uprugoplasticheskoe deformirovanie i razrushenie [Influence of the Accounting for the Reduced Mechanical Properties in the High-rise Direction of Barriers on their Elastic-plastic Deformations and Destruction]. Mekhanika kompozitsionnykh materialov i konstruktsiy [Mechanics of Composite Materials and Designs]. 2010, vol. 16, no. 1, pp. 43—54.
- Bathurst R.J., Allen T.M., Nowak A.S. Calibration Concepts for Load and Resistance Factor Design (LRFD) of Reinforced Soil Walls. Canadian Geotechnical Journal. 2008, vol. 45, no. 10, pp. 1377—1392.
- Pavlov A.S. Chislennoe modelirovanie deformirovaniya i razrusheniya uzlov stroitel'nykh konstruktsiy [Numerical Modeling of Deformation and Destruction of Structural Connections]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2011, no. 4, pp. 525—529.
- Birger I.A., Panovko Ya.G. Prochnost', ustoychivost', kolebaniya : spravochnik v 3 tomakh [Durability, Stability, Fluctuations : The Reference Book in 3 Volumes]. Mashinostroenie Publ., 1968, vol. 3, 568 p.
- Baziar M.H., Kashkooli A., Saeedi-Azizkandi A. Prediction of Pile Shaft Resistance Using Cone Penetration Tests (CPTs). Computers and Geotechnics. 2012, vol. 45, pp. 74—82. DOI: http://dx.doi.org/10.1016/j.compgeo.2012.04.005.
- Sladkova L.A., Abros'kin N.P., Nekrest'yanov V.N. Zayavka 2012125272 RF, MPK G01N3/00. Sposob opredeleniya prochnosti konstruktsii. Zayavitel' FGBOU VPO «VTU», ¹ 2012125272/28; zayavl. 19.06.2012; opubl. 20.01.2014. Byul. ¹ 2 [Application 2012125272 RF, MPK G01N3/00. Method of Determining the Structure Durability. Applicant: Military Technical University, no. 2012125272/28; notice 19.06.2012; publ. 20.01.2014. Bulletin no. 2]. 1 p.

Pages 154-160

The Desargue configuration plays an essential role not only in projective geometry, being the main configuration in projective and perspective correspondence of rows of points and lines, but is also rich in applications in architectural and design engineering. The article describes the main aspects of planar and spatial configuration of Desargue, and fundamental principles having particular importance in the shaping theory based on projectography. The described configuration properties indicate the possibility of wide application in architectural design and engineering and allow predicting the effects of perception of rather complex architectural forms. Examples of a number of buildings are given, where in modern design solutions of architects spatial configuration motives are visible. Planar configuration option is often used as decoration and fencing. The authors conclude that researching the configuration of Desargue in different variants and modifications not only contributes to better understanding of the theory of perspective and shadows, but also provides opportunity to detect relations of the problems, which are different at the first sight. However it is necessary to take into account, that many postulates of the theory are quite complicated and significant amount of time is needed for learning it.

DOI: 10.22227/1997-0935.2014.9.154-160

- Berzhe M. Geometriya [Geometry]. Moscow, Mir Publ., 1984, vol. 1, 297 p.
- Vinogradov I.M., editor. Matematicheskaya entsiklopediya [Mathematical Encyclopedia]. Moscow, Sovetskaya entsiklopediya Publ., 1979, vol. 2, 1104 p.
- Gamayunov V.N. Proektivografiya. Geometricheskie osnovy khudozhestvennogo konstruirovaniya. [Projectography. Geometric Foundations of Artistic Design]. Moscow, MGPI Publ., 1976, 25 p.
- Prokhorov Yu.V., editor. Matematicheskiy entsiklopedicheskiy slovar' [Encyclopedic Dictionary of Mathematics]. Moscow, Sovetskaya entsiklopediya Publ., 1988, 848 p.
- Wieleitner H. Istoriya matematiki ot Dekarta do serediny 19 stoletiya [History of Mathematics from Descartes to the mid-19th century]. Moscow, Fizmatlit Publ., 1960, 468 p.
- Ivashchenko A.V., Kondrat'eva T.M. Proektivograficheskiy analiz mnogogrannikov Dzhonsona [Analysis of Johnson’s Polyhedra Using Projective Geometry Techniques]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2013, no. 5, pp. 226—229.
- Hilbert D., Cohn-Vossen S. Anshauliche Geometrie. Berlin, Springer, 1996, 365 s.
- Chetverukhin N.F. Proektivnaya geometriya [Projective Geometry]. 7th edition. Moscow, Gosudarstvennoe uchebno-pedagogicheskoe izdatel'stvo Publ., 1961, 360 p.
- Coxeter H.S.M. Projective Geometry. New York, Blaisdell Publ., 1964, pp. 26—27.
- Lelong-Ferrand J. Les Fondements de La Geometrie. Presses universitaires de France; 1re ed edition, 1985, 287 p.
- Semple J., Kneebone G. Algebraic Projective Geometry. Oxford, 1952, 405 p.
- Ivashchenko A.V., Kondrat'eva T.M. Proektivograficheskie chertezhi mnogokomponentnykh sistem mnogogrannikov [Shape Generation by Means of a New Method of Orthographic Representation ("Proektivografiya"): Drawings of Multi-Component Polyhedra]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 6, pp. 155—160.
- Efimov N.V. Vysshaya geometriya [Higher Geometry]. 5th edition. Moscow, Nauka Publ.,1971.
- Voloshinov A.V. Matematika i iskusstvo [Mathematics and Art]. Moscow, Prosveshchenie Publ., 2000, 400 p.
- Sobolev N.A. Obshchaya teoriya izobrazheniy [The General Theory of Images]. Moscow, Arkhitektura-S Publ., 2004, 672 p.
- Runge V.F., Sen'kovskiy V.V. Osnovy teorii i metodologii dizayna [Fondamentals of Design Theory and Methodology]. Moscow, MZ-Press, 2003, 252 p.

Pages 161-167

During the current decades the aspect of geometrography compositions formation on the basis of basic images has been actively developed. The basic images possess the qualities of harmonies, expressed by lines, squares, tone, color. The relations of square-rectangular forms belonging to plane geometry of parabolic, hyperbolic and elliptic fields has been already analyzed by scientists. This article introduces equiareals construction of square-rectangular shapes, as well as their rows - in classical composition of elementary figures of "squaring the circle". Variations of such constructions, in their turn, offer the possibility to seek and capture new geometrical graphical compositions, practical application of which can be wide enough in technology design and mechanical engineering, architecture and construction, decoration of household items, arts and crafts and costume fabrics, et cetera. The authors consider the topic of plane geometry "Field-M", which is based on a rectilinear grid of ortholines with circulations in its nodal points. The conclusions made by the authors is that the necessity of solutions for more and more various and complicated problems in the conditions of time limitation determines the development of geometrography methods as an effective operating system along with program methods of cognitive graphics.

DOI: 10.22227/1997-0935.2014.9.161-167

- Kapustina O.M., Martynenko Yu.G. Ispol'zovanie sistem simvol'nykh vychisleniy v prepodavanii teoreticheskoy mekhaniki [Application of Symbolic Calculation in Teaching Theoretical Mechanics]. MEI, MGU, Publ., 2012. Available at: http://vuz.exponenta.ru/PDF/book/KapMart2.pdf. Date of access: 21.04.2014.
- Kheyfets A.L. Uchebnyy kurs teoreticheskikh osnov 3D-komp'yuternogo geometricheskogo modelirovaniya i ego perspektivy [Study Course of Theoretical Foundations of 3D Computer Geometric Modeling and its Opportunities]. Informatizatsiya inzhenernogo obrazovaniya : trudy Mezhdunarodnoy nauchno-metodicheskoy konferentsii. INFORINO-2012 (Moskva, 10—11 aprelya 2012 g.) [Information of Engineering Education : Works of International Research and Methodology Conference. INFORINO-2012 (Moscow, April 10—11, 2012)]. Moscow, MEI Publ., 2012, pp. 119—122.
- Kondrat'eva T.M., Polezhaev Yu.O. Chastnye voprosy geometrografii primenitel'no k sisteme "Pole-metr" i kvadrature kruga [Special Questions of Geometrography Relating to the System "Pole-metr" and Quadrature of a Circle]. Inzhenernaya geometrografiya — issledovaniya i razrabotki : sbornik nauchnykh trudov. Moscow, MGSU Publ., 2006.
- Polezhaev Yu.O., Borisova A.Yu., Kondrat'eva T.M. Lineynye puchki v tsirkul'no-ellipticheskikh sootvetstviyakh [Linear Bundles within the Framework of Coincidence of Circle and Ellipse]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2012, no. 6, pp. 62—67.
- Polezhaev Yu.O., Mitina T.V. Sootnosheniya geometricheskikh elementov kvadratury kruga v «Pole-M» [Correlation of Geometric Entities of the Quadrature of the Circle]. Vestnik MGSU [Proceedings of Moscow State University of Civil Engineering]. 2010, no. 4, vol. 5, pp. 250—254.
- Arkhimed, Gyugens, Lezhandr, Lambert. O kvadrature kruga [On Squaring the Circle]. Editorial USSR, 2003, 239 p.
- Khal Khellman. Velikie protivostoyaniya v nauke. Desyat' samykh zakhvatyvayushchikh disputov [Great Confrontations in Science. Ten of the Liveliest Disputes Ever]. Moscow, ID Vil'yams Publ., 2007, 320 p.
- Polya G. Mathematical Discovery: On Understanding, Learning and Teaching Problem Solving Combined Edition. 1981, Wiley; Combined edition, 432 p.
- Fedorov E.S. Nachala ucheniya o figurakh [Foundamentals of the Theory of Figures]. Moscow, EE Media Publ., 2012, 418 p.
- Gil'bert D. Osnovaniya geometrii [Foundations of Geometry]. Moscow, Leningrad, OGIZ Publ., 1948, 491 p.
- Hilbert D., Cohn-Vossen S. Anschauliche Geometrie. 1996, Springer; Auflage: 2. Aufl., 365 p.
- Klein F. Neevklidova geometriya [Non-Euclidean Geometry]. Moscow, Leningrad, GTTI Publ., 1936, 355 p.
- Bashlykov A.A. Obraznoe predstavlenie sostoyaniya slozhnykh tekhnologicheskikh ob"ektov upravleniya [Figurative State Representation of Complex Engineering Systems]. Iskusstvennyy intellekt i prinyatie resheniy [Artificial Intellect and Decision-Making]. 2013, no. 3, pp. 9—18. Available at: http://www.aidt.ru/images/documents/2012-03/9_18.pdf. Date of access: 11.09.2013.
- Gornov A.O., Shatsillo L.A. Fraktal'nyy podkhod k strukturirovaniyu geometro-graficheskoy podgotovki [Fractal Approach to Structuring of Geometry-Graphical Education]. Innovatsionnye tekhnologii v inzhenernoy grafike. Problemy i perspektivy : Materialy Mezhdunarodnoy nauchno-prakticheskoy konferentsii (Brest 21 marta 2014 g.) [Innovation Technologies in Engineering Graphics. Problems and Opportuninties : Materials of International Scientific and Practical Conference (Brest, March, 21, 2014)]. Brest, BrGTU Publ., 2014, pp. 19—22. Available at: http://ng.sibstrin.ru/wolchin/img/Brest%202014.pdf. Date of access: 11.05.2014.
- Shcheglov G.A. O kompetentsiyakh CAD/CAE integratsii geometrograficheskikh modeley [On the Competences of CAD/CAE Integration of Geometrographical Models]. Informatsionnye sredstva i tekhnologii : trudy 20 Mezhdunarodnoy nauchno-tekhnicheskoy konferentsii (20—22 noyabrya 2012 g. Moskva) : v 3 t. [Informational Media and Technologies : Works of the 20th International Science and Technical Conference (November 20—22, 2012, Moscow) : in 3 volumes]. Moscow, MEI Publ., 2012, vol. 2, pp. 81—84.